Filter
Top Products
LAN
LAN
NME
A 0
183
Information to be received
Acquisition and tracking of traffic around your vessel is
absolutely necessary for safe and efficient navigation.
FURUNO’s FA-30 AIS Receiver provides navigational data about
other AIS-equipped vessels, increasing your situational
awareness and allowing you to navigate more safely.
The FA-30 incorporates real-time AIS information into your
radar, chart plotter or a PC. AIS targets are displayed with
SOG/COG vector, which aids you in recognizing possible
collisions and grasp the navigational situation at a glance,
even in congested waterways. Closest Point of Approach
(CPA) and Time to Closest Point of Approach (TCPA) can be
computed and displayed on-screen.
The FA-30 outputs AIS data to NavNet 3D and NavNet vx2
series as well as to PC with AIS Viewer software via an Ethernet
connection. The FA-30 can also be interfaced with a FURUNO
radar or chart plotter via NMEA0183 format to supplement
those systems.
Dynamic Data
• Ship's position
• Coordinated universal time (UTC)
• Course over ground (COG)
• Speed over ground (SOG)
• Rate of turn (ROT)
• Heading
• Navigation status*
Static Data
• MMSI (Maritime Mobile Service Identity)
• IMO number*
• Ship's name
• Type of ship
• Call sign
• Length and beam
• Location of position-fixing antenna on the ship
Voyage Related Data
• Ship's draft*
• Hazardous cargo
• Destination and ETA*
Safety-related messages
* Class-A AIS only
The FA-30 delivers “Real-Time” AIS information to navigation systems
providing critical collision avoidance information in all weather conditions
Radar FR-8xx2 series
When interfacing with FR-8xx2 series,
AIS interface IF-1500AIS is needed.
COG/SOG vector changes its length
according to SOG.
ROT mark is viewable when the
target vessel sends the information.
Past track dots enables you to
evaluate the target's action.
AIS target symbol
AIS target data
for the selected vessel
COG/SOG
vector
ROT mark
Past track
dots
COG/SOG vector
Past track line
AIS target
AIS information
When placing a cursor onto the AIS
target, an AIS data window will pop
up to display the following data of
the target: Ship's name, COG, SOG,
CPA, TCPA, Range and Bearing.
AIS target AIS information
NavNet vx2 can
also be interfaced
to the FA-30
AIS Viewer for PC
(Standard supply)
The software can be upgraded to a full
version of MaxSea Navigation Software
or MaxSea-NavNet Software.
AIS info on NOAA chart
Rough raster chart is already
installed. Also, additional charts can
be installed into this viewer.