Filter
Top Products
F I S H S I Z E
B O T T O M
The FCV-627 knows sh size
and bottom structure under your boat !
5.7" Color LCD FISH FINDER
Model
Enhanced
Sunlight Viewable
AUTO
Enhanced
Sunlight Viewable
Bonded
LCD
Bonded LCD
Auto Tuning
(Sensitivity)
Bottom
Discrimination
FURUNO Digital
Filter
ACCU-FISH
Polarized
Friendly
Polarized
Friendly
“ACCU-FISH” identies individual sh
with size and sh mark function
Recognizes individual or multiple sh instantaneously
ACCU-FISH is a revolutionary sh size assessment function of the FCV-627. In order to assess
individual sh size, the echo strength from the sh needs to be computed and turned into sh
size display on the screen. It can detect the sh size of 10 to 199 cm, in the depth of 2 to 100 m.
Displaying sh size or sh depth
Activating the ACCU-FISH from the menu, FSV-627 displays sh size on the individual sh echo.
When the ACCU-FISH is used concurrently with sh marks, it greatly helps anglers to identify
sh targets on the display. You may also select and display the target depth instead of sh size,
which helps to see how far the sh is from the boat.
Displaying sh marks
The sh mark can be utilized to display on individual sh echoes when detected.
It helps beginners to identify the sh targets on the display for a more fun shing experience.
Fish mark is selectable from two types of sh symbol,
circle and square. The sh symbol, displayed in two
different sizes (Large: over 50 cm, Small: 10 to 49 cm),
is a great help for anglers to identify sh targets. Circle
and square indentify targets without hiding sh echo.
Striped
Solid
Circle
Square
Circles and sh size are displayed on sh
echoes. When in dual frequencies mode, you
can set the mark displayed on both or either
frequency screen.
Bottom Discrimination feature
The FCV-627’s Bottom Discrimination feature enables the sh nder to indicate if a major
component of the bottom is mud, sand, gravel or rocks.
The Bottom Discrimination Function provides you with valuable information to locate rich shing
grounds, while boosting your catch of the day.
White Line function distinguishes sh from bottom
The white line function helps you distinguish bottom sh from the bottom by changing the strongest
signal color to white. This function is not only useful discriminating bottom sh but is also valuable
for judging sh school density. The setting range is 0%-100%,
in intervals of 1%. The higher the value the thicker the line.
Please keep the following in mind when using the Bottom Discrimination Sounder:
1) Use at a depth of 5 m - 100 m.
2) Use transducer in transom mount or thru-hull mount.
3) To show a consistent display of the actual bottom, set the range display
of the sh nder screen to “auto”.
4) Enter the ship’s draft value
5) Use a ship speed of 10 kn or less.
6)
In some instances, bottom component indicated on the FCV-627 may
carefully
differ from its actual bottom structure.
Please read the operation manual prior to utilizing this feature.
The standard graphic display mode shows the most
probable bottom composition by graphic or four colors.
Rocks
Gravel
Sand
Mud
Rocks
Gravel
Sand
Mud
Graphic mode
The probability display mode shows the most
probable bottom composition in graph form.
Probability mode
Field Test
Screen shot from sh reef in lake:
Many sh marks appears on the screen in the thick weed bed.
The white line function helps distinguish bottom and weed from
the actual sh.
In some instances, sh size indicated on the FCV-627 may differ from its actual size.
Please carefully read the operation manual prior to utilizing this feature.
ViewableBlack out
Post-Processing Gain Control
With conventional gain controls, changes are made for new
echoes only when a change in the setting is applied. With the
FCV-627’s Post-Processing Gain Control, changes in the gain
setting are applied to new echoes as well as all of the echoes
already on the screen. Because the changes are applied to
both new and existing returns, you will be able to quickly and
easily nd the right gain setting for your conditions.
Fish Alarm function
When sh echoes come in the area which you set above the bottom, beeps sound and the alarm icon ashes
at the top right corner of the screen. Furthermore, an integrated alarm setting is also available that can be set
by every and each condition, including water depth, target depth, water temp, bottom component, etc.
Bright LCD for excellent in sunlight viewability
Bright 800 cd/m
2
LCD gives excellent readability even in bright sunlight.
FCV-627 has a LCD screen which does not "black out" when
wearing polarized sunglasses at certain angles, providing no
loss of visibility while shing.
Conventional FCV-627
Gain: 4Gain: 2
Conventional gain setting
Gain: 4 Gain: 2
Conventional
FCV-627
5.7" Color LCD FISH FINDER
The FCV-627 knows sh size
and bottom structure
under your boat !
Model
Enhanced
Sunlight Viewable
Enhanced
Sunlight Viewable
Bonded
LCD
Bonded LCD
AUTO
Auto Tuning
(Sensitivity)
Bottom
Discrimination
FURUNO Digital
Filter
www.furuno.com
12065SK Printed in Japan
Catalogue No. E-409a
ACCU-FISH
Polarized
Friendly
Polarized
Friendly
▲
Equipped with Furuno’s latest technology: the Bottom Discrimination Function
- Analyze bottom structure*
•
Provides an at-a-glance recognition of bottom form with four types of graphical displays (Rocks/Gravel/Sand/Mud)
when connected to required thru-hull or transom mount transducer.
* Thru-hull or transom transducer mount required
▲
ACCU-FISH - A unique sh size analyzer based on the latest digital technology
▲
White Line feature - Discriminate sh lying near the bottom
•
The top edge of the sea oor is displayed in white to clearly show structures.
•
This feature helps to discriminate weeds and bottom sh distinctly.
▲
Congurable Alarm function (depth, sh echoes, etc.)
▲
Post-processing Gain Control applied to all echoes displayed on the screen
▲
Share and display information on a chart plotter*
•
Furuno’s TLL (Target Lat/Lon) output allows you to interface the FCV-627 with your chart plotter
so that you can mark shing spots with various information (L/L, Depth, Water Temp, Fish size, Bottom).
* Required connection to chart plotter.
▲
Fast transmission rate of 3,000 PRR (Pulse Repetition Rate) per minute (at 5 m depth range)
▲
Bright 800 cd/m
2
LCD gives excellent readability, even in bright sunlight
•
The LCD and the AR glass are bonded together to ensure no fogging issues.
•
Clear visibility even when wearing polarized sunglasses.
INTERCONNECTION DIAGRAM
GPS
Navigator
GPS
Plotter
12/24 VDC Transducer
NMEA0183
Option
DISPLAY UNIT
Flush Mount 0.9 kg 2 lb
Bracket Mount 1.3 kg 2.9 lb
170 6.7"
62
2.4"
43
1.7"
106 4.2"
132 5.2"
54 2.1"
90˚
170 6.7"
207 8.2"
219 8.6"
170 6.7"
54 2.1"
52 2"
106 4.2"
170 6.7"
120 4.7"
4-ø4.5
ø127
110 4.3"
Cutout for ush mount
115 4.5"
55 2.2"
60 2.4"
60 2.4"
4-ø6
R103
60˚
60˚
122 4.8"
GENERAL
Frequency 50 and 200 kHz
Output Power 600 W
DISPLAY
Display Type 5.7" color LCD
Effective Display Area 87.1 (W) x 116.2 (H) mm
Pixel Number 640 x 480 (VGA)
Display Single frequency (50 or 200 kHz),
Dual-frequency, Zoom, Nav data,
A-scope, Marker zoom, Bottom zoom,
Bottom-lock, Bottom Discrimination,
ACCU-FISH™
Basic Range 2-1200 m*
*m, ft, fm, HR, pb can be selected in the menu
Alarm Bottom, Fish (Normal), ACCU-FISH™,
Fish (B/L), Bottom Discrimination, Fish
Level, Temperature, Speed, Arrival and
Battery
Language English, French, Spanish, German,
Italian, Portuguese, Greek, Polish,
Danish, Swedish, Norwegian, Finnish,
Chinese, Japanese, Thai, Vietnamese
Range Phasing up to 1200 m
Expansion Range Bottom-lock expansion: 2-10 m
Sectional expansion: 2-1200 m
Picture Advance Speed 8 steps: stop, 1/16, 1/8, 1/4, 1/2,
1, 2, 4
Pulselength & PRR 0.1-3 ms, Max 3,000 pulse/min
Interface (Input) BWC, GGA, GLL, GNS, HDG,
HDT, MDA, MTW, MWV, RMA, RMB,
RMC, VHW, VTG, XTE, ZDA
(Output) DBS, DBT, DPT, MTW*, RMB*,
VHW*, TLL* by key operation
* External data required.
ENVIRONMENT
Temperature -15°C to +55°C
Waterproong IP56
POWER SUPPLY 12-24 VDC, 13W
EQUIPMENT LIST
Standard
1. Display Unit CV-627
2. Installation Materials and Standard Spare Parts
Option
1. Speed/Temperature Sensor
ST-02MSB (Thru-hull, bronze), ST-02PSB (Thru-hull, plastic),
T-02MTB (Transom, bronze), T-02MSB (Thru-hull, bronze),
T-03MSB (Thru-hull, bronze)
2. Connector Kit for Connection of Speed
& Temperature Sensor or Temperature Sensor
3. NMEA+Power Cable
Transducers (Specify when ordering)
520-5PSD (Plastic thru-hull), 520-5MSD (Bronze thru-hull),
525-5PWD (Plastic transom), 525STID-MSD (Bronze thru-hull
with a speed/temp sensor), 525STID-PWD (Plastic transom
with a speed/temp sensor)
SPECIFICATIONS OF
The gimbal mount allows the display unit to swivel around
when desktop mounted. You can adjust the angle of the display
so that the optimum viewing angle can be easily achieved.
Swivel mounting bracket to adjust
the angle of the display unit