Filter
Top Products
1-33
1.43 Background Color
The secondary function of the BRILL control
(BKGND COLOR) is to select the color of the
background, characters, menu, markers and
indications, from the five color combinations
shown in the table below. Each press of the
control selects one of the five color combina-
tions.
Table 1-4 Available color combinations
tnemegnarrA12345
yalpsiDradaR
aerA
KLBULBULBULBKLB
radaRedistuO
aerAyalpsiD
KLBKLBKLBULBKLB
sretcarahCNRGNRGNRGTHWDER
uneMLEYLEYLEYLEYDER
thgilhgiHuneMLEYLEYLEYLEYDER
MRV/LBEULB-LNRGNRGNRGULB-L
sgniRegnaRNRGTHWTHWTHWNRG
rosruCTHWNRGNRGNRGTHW
eniLgnidaeHNRGTHWTHWTHWNRG
mralAtegraT
enoZ
THWULB-LULB-LULB-LTHW
rekraMhtroNTHWULB-LULB-LULB-LTHW
rekraMnretSTHWULB-LULB-LULB-LTHW
;etihW,THW;eulb-thgiL,ULB-L;eulB,ULB;kcalB,KLB
wolleY,LEY,neerG,NRG
1.44 Selecting Range Scales
Range scales to use may be selected as fol-
lows:
1. Press the [MENU] key.
2. Press the [0] key four times to display the
OTHER sub menu.
OTHER
1. ↑
2. TEST
3. DEGAUSS
4. TIME ALARM
5. RANGE
6. INSTALL
Figure 1-53 OTHER sub menu
3. Press the [5] key twice to select RANGE.
RANGE
1. ↑
2. RANGE 1/8 1/4 1/2
3/4 1 1.5 2 3
4 6 8 12 16
24 32 48 72 96 120
Figure 1-54 RANGE menu
4. Press the [2] key to place the underline
under the range scale to select/deselect
and then press the [ENTER/SELECT]
key. Active ranges are highlighted. Repeat
to select/deselect other ranges.
5. Press the [MENU] key.
1.45 Selecting Bearing Scale
Format
The bearing scale may be displayed in de-
grees or compass points or degrees as fol-
lows:
1. Press the [MENU] key.
2. Press the [0] key twice to display the
OTHER menu.
3. Press the [6] key twice to display the
MARK/LINE menu.
MARK/LINE
1. ↑
2. INDEX LINES 2 6
3. STERN MARK OFF ON
4. SHIP’S MARK OFF ON
5. BEARING SCALE 360 COMPASS
Figure 1-55 MARK/LINE menu
4. Press the [5] key to select 360 (degrees)
or COMPASS.
5. Press the [ENTER/SELECT] key to reg-
ister your selection and the [MENU] key
to close the menu.