Filter
Top Products
3
Setting Destination by
Waypoint Number
1. Place the cursor on the waypoint you want
to go on the plotter display.
2. Press the soft key GO TO WPT.
Cancelling Destination
1. Press the [WPT/RTE] key.
2. Press the soft key LOG.
3. Press ▲ or ▼ to select the waypoint desired.
4. Press the soft key STOP.
5. Press the [ENTER] key to select YES on the
confirmation window.
6. Press the soft key RELEASE to show the
confirmation window.
7. Press the [ENTER] key to select YES.
Setting Arrival Alarm
1. Press the [ALARM] key to show the alarm
menu.
DGPS 3D
ALARM1
EDIT
CLEAR
ALARM
ALARM INFORMATION
AUDIO ALARM
ARRIVAL ALARM
ANCHOR ALARM
PROXMTY ALARM
XTE ALARM
SPEED ALARM
ON
ON 0.100nm
ON 0.050nm
ON
ON 0.100nm
OVER/UNDER
12.5 ~ 15.0kt
NO ALARM
NEXT
PAGE
s
2. Select ARRIVAL ALARM.
3. Press the soft key EDIT
4. Press ▲ or ▼ to select ON.
5. Key in the alarm range.
6. Press the soft key ENTER.
Silencing audible alarm: [CLEAR] key.
Disabling alarm: Select OFF at step 3 above.
♦SOUNDER♦
SNDR
FUNC
SHIFT
GAIN
RANGE
SOUNDER
135° 12.345’ E
34° 12.345’ N
SPD
CSE
16.3kt
245.8°
MODE/
FREQ
50k
DGPS 3D
Nav information
window
Color
bar
Functions for
soft key
Variable
Range
Marker
(White)
Depth scale
Tx frequency
GPS status
Depth
20
30
40
50
30
20
10
0
Temp.
scale
Water
temp.
graph
Water
temp.
display
54.0m
Typical indications on
normal video sounder display
Showing the Sounder
Display
Press the [SNDR] key.
Each pressing of this key toggles the display
among Plotter/Sounder display, Normal sounder
display and Dual-frequency display.
Selecting the Sounder
Display Mode
1. On the normal display, press the soft key
SNDR FUNC.
2. Select the mode desired.
3. Press the soft key RETURN.
Automatic Sounder
Operation
1. On the normal or dual-frequency display,
press the soft key MODE/FREQ. When the
plotter/sounder display is displayed, press the
soft key SNDR, and then press the soft key
MODE/FREQ.
2. Select AUTO.
3. Press the soft key RETURN.