Filter
Top Products
7
2.2 OID/DID Setting
Set the ID number of each telephone connected to the IB-782, from the handset connected
to the communication unit. The two-digit ID number should be the same as the telephone no.
(01-08); for example, TEL No. 2 would be “02.” ID numbers should be set after setting the
PBX mode, the instructions for which appear in the paragraph 2.1.
1. Turn on the communication unit.
2. From the handset, press [FUNC Quit], [5], [9], [3].
59OID/DID
EXT:0 1 NUM
OID/DOD
TEL: /
IMN:
FAX: /
IMN:
Enter:[Ent]
Quit: [Quit]
OID/DID menu
3. Enter telephone ID number in the EXT field, using the numeric keys.
4. Press the [
] key, then enter OID/DID number and Inmarsat number. If the OID/DID
number is 03 and the IMN is 343164710 hit the following keys:
[0] [3] [0] [3] [
] [3] [4] [3] [1] [6] [4] [7] [1] [0]
The cursor can be shifted with the arrow keys. The OID/DID number is a hexadecimal
number – you can switch to alphabet with the [Mode] key. To cancel input, press the
[Func Quit] key.
5. Press the [Ent] key.
6. Press the [FUNC Quit] key to quit.