Furuno PG-500 Fish Finder User Manual


  Open as PDF
of 2
 
1. Accuracy
±1.0°
2. Correction
Deviation: Automatic by running the boat over 360°
Variation: Automatic through GP-32, GP-1850W, etc.
3. Freedom of tilt
±35°
4. Angular velocity
25°/s max.
5. Output rate
IEC 61162, NMEA 0183:
selectable from 25, 100, 200 ms, 1 s
AD-10: Up to 25 ms
6. Interface (IEC 61162-1/61162-2*, NMEA0183, AD-10)
Output: HDG, HDT, HDM
Input: VTG (SOG, COG), RMC
(* output only)
ENVIRONMENT (IEC 60945 testing)
Temperature: -15° to +55°C
Waterproofing: IPX5 (IEC 60529),
CFR-46 (USCG standard)
POWER SUPPLY
12 - 24 VDC, 2 W
SPECIFICATIONS OF PG-500
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
DIMENSIONS
152 6.0"
141 5.6"
130 5.1"
62 2.4"
03075Y Printed in Japan
PG-500
12-24 VDC
Autopilot
NAVpilot-500
FURUNO
Radar/Sonar
AD-10 format
10 m (5/10 m)
2 m (5/10 m)
2 m
GPS/DGPS/
WAAS
Radar
VideoPlotter, etc.
Remote Display
RD-30
NMEA/IEC
option
NMEA/IEC: 2 ports
AD-10: 1 port
0.3 kg 0.7 lb
Note: This PG-500 heading sensor utilizes the earth's magnetism.
Therefore, steel-hull installations could be problematic
due to residual magnetism. An SC-60/120 GPS Compass
may be required.
FURUNO U.S.A., INC.
Camas, Washington, U.S.A.
Phone: +1 360-834-9300 Telefax: +1 360-834-9400
FURUNO (UK) LIMITED
Denmead, Hampshire, U.K.
Phone: +44 2392-230303 Telefax: +44 2392-230101
FURUNO FRANCE S.A.
Bordeaux-Mérignac, France
Phone: +33 5 56 13 48 00 Telefax: +33 5 56 13 48 01
FURUNO ESPANA S.A.
Madrid, Spain
Phone: +34 91-725-90-88 Telefax: +34 91-725-98-97
FURUNO DANMARK AS
Hvidovre, Denmark
Phone: +45 36 77 45 00 Telefax: +45 36 77 45 01
FURUNO NORGE A/S
Ålesund, Norway
Phone: +47 70 102950 Telefax: +47 70 127021
FURUNO SVERIGE AB
Västra Frölunda, Sweden
Phone: +46 31-7098940 Telefax: +46 31-497093
FURUNO SUOMI OY
Helsinki, Finland
Phone: +358 9 341 7570 Telefax: +358 9 341 5716
INTERCONNECTION DIAGRAM
The PG-500 comes as
the standard compass for the NAVpilot-500.
Self-learning, Adaptive Autopilot
TM
EQUIPMENT LIST
Standard
1. Heading Sensor PG-500 1 unit
2. Interface Cable (with 6p-6p connectors) 1 pc
MJ-A6SPF0007-100, 10 m
3. Installation Materials
(including power/interface cable:
MJ-A7SPF0009-020 with 7p-7p connectors, 2 m)
Option
Interface Cable
For IEC 61162, NMEA0183:
MJ-A7SPF0006-100 with 7p-7p connectors, 10 m
MJ-A7SPF/SRMD-100 with 7p-7p connectors, 10 m
MJ-A6SPF0003-050* with 6p connector, 5 m
(* also available for AD-10 format)
For AD-10:
MJ-A6SPF0007-100 with 6p-6p connectors, 10 m
 previous