Fusion MS-WR600C Marine Sanitation System User Manual


  Open as PDF
of 2
 
Button Description
POWER
Press to turn the unit ON/OFF.
SOURCE
Press to select the desired source.
Radio (FM-AM-SIRIUS) - DVD/CD/MP3 - iPod - AUX
(SIRIUS - USA only)
MUTE
Short Press
Press to Mute/Un-Mute sound in all zones.
Press and Hold
To enter configuration menu.
MENU
Press to enter menu system. Press to
return to previous screen.
PLAY/PAUSE
Play/Pause track in DVD/CD/MP3 and iPod mode.
MS-RA200 only - Press to cycle tuner
station search. Manual/Auto/Preset
ROTARY ENCODER
Turn
To adjust volume, move up or down a menu
structure, or adjust a specific setting item.
Press
To select a highlighted option, confirm a setting.
BACK/PREVIOUS
Short Press
DVD/CD/MP3/iPod - Select the previous
track.
AM/FM/Sirius - Start tuning down the
frequency spectrum. (Auto/Manual tuning
mode) or previous preset (Preset mode).
Press and Hold
DVD/CD/MP3/iPod - Rewind the current track.
FORWARD/NEXT
Short Press
DVD/CD/MP3/iPod - Select the next track.
AM/FM/Sirius - Start tuning up the
frequency spectrum. (Auto/Manual tuning
mode) or next preset (Preset mode).
Press and Hold
DVD/CD/MP3/iPod - Fast forward the current
track.
Operation
ASSIGNING THE REMOTE TO A ZONE
Press and hold the ‘Mute’ button for 5-6 seconds.
Select ‘Assign Zone’. Select zone to allocate remote too.
(Zone 1, Zone 2, Zone 3, Zone 123).
Press the ‘Menu’ button to exit.
Note: The MS-RA200 is a 2 Zone Marine Stereo, Zone 3
is not available.
SUB LIMIT
Press the ‘Menu’ button and select ‘Sub Limit’.
Turn the ‘Rotary Encoder’ to adjust level. Press the
‘Menu’ button to exit.
ZONE VOLUME
Turn the ‘Rotary Encoder’ to adjust the volume in the
assigned zone.
BACKLIGHT BRIGHTNESS
Press and hold the ‘Menu’ button while turning the
‘Rotary Encoder’ to adjust.
Standby Mode
After a period of inactivity the remote enters standby
mode, reducing the backlight brightness. (Default)
To switch the backlight off in standby mode (Power save),
press and hold the ‘Mute’ button for 5-6 seconds. Select
‘Backlight’. Select ‘Off’. Press the ‘Menu’ button to exit.
Installation
RECORD YOUR PRODUCT DETAILS HERE:
Model Number
Date Of Purchase
Affix Receipt Here
To complete the ultimate marine audio experience, a
total of three MS-WR600 Marine Wired Remote Controls
can be installed in various locations, creating a flexible
zone control solution throughout a vessel.
The MS-WR600 is a plug and play device. Connect to the
CANbus cable connection on your FUSION Marine Stereo.
Please refer to the MS-CD600/MS-AV600/MS-IP600/
MS-RA200 Marine Stereo manual for further detailed
operation instructions.
Option 1: Recommended installation.
Option 2: Requires a Y Splitter Cable (MS-WR600Y, sold
separately). Cables from the splitter (*) to each remote
must be of equal length to ensure correct operation.
Note: The supplied ‘Terminator Plug’ must be fixed to
the last remote. Failure to do so could effect operation.
Optional Accessory: MS-WR600EXT6 - 6m extension lead.
MS-WR600Y - Y Splitter Cable
OPTION 2
TERMINATOR
PLUG
TERMINATOR
PLUG
MS-WR600Y
**
OPTION 1
TERMINATOR
PLUG
Note: The remote should be
mounted on no more than a 45˚
angle from the verticle plane.
45˚
 previous