Filter
Top Products
Power/Backlight—press and hold to turn the unit on or off. Press
and release to cycle through the backlight settings.
RANGE—press to display the Range Menu and select a new
Range setting.
PAGE
PAGE—press to cycle through the main pages.
QUIT
QUIT—press to exit a current menu or configuration option, or to
cancel data entry.
ENTER
ENTER—press to select a highlighted item, initiate data, entry and
accept selected values.
ADJ
MENU
ADJ/MENU—press and release to show the Adjustment Menu.
Press and hold to open the Main Menu.
GAIN
GAIN—press to show the Gain Menu. Use the Rocker to change
the Gain setting.
PAUSE
PAUSE—press to pause a Sonar Page. Press and hold for two
seconds to enter Pointer mode on a Sonar Page.
DATA
CNFG
DATA/CNFG—press to toggle the data fields in the upper-left of
the screen between basic and advanced configurations. Press and
hold for two seconds to enter the Advanced Data Setup Menu.
Rocker—press to highlight a menu option, enter data, change
settings, and control the pointer movement.
ADJ
MENU
DATA
CNFG
Adjustment Menu
Main Menu
Keypad Usage Data Configuration
Press DATA/CNFG to toggle between basic and advanced
configurations. Press and hold DATA/CNFG to show the Advanced Data
Setup Menu. To change a data field, highlight a field and press ENTER.
From a Sonar Page or the Flasher Page, press and release
ADJ/MENU to show the Adjustment Menu. The Adjustment
Menu contains selections based on the current page.
To change a setting, use the Rocker to highlight a selection,
and press ENTER. Use the Rocker to make a change, and
then press ENTER to accept the change. Adjustment setting
changes are retained when the unit is turned off.
ADJ
MENU
From any page, press and hold ADJ/MENU to show the Main
Menu. The Main Menu contains unit setup items including
settings for the Graph, Sonar, Temp, Alarms, System, Units,
and Time.
To view a tab, use the
Rocker to highlight the tab. To change a
setting, use the Rocker to highlight a field and press ENTER.
Use the Rocker to make a selection, and press ENTER to
accept the change. Changes made in the Main Menu are kept
in memory and do not change when the unit is turned off.