Garmin 5000 Marine GPS System User Manual


  Open as PDF
of 18
 
14 GPSMAP 4000/5000 Series Installation Instructions
Marine Video Cable
The included Marine Video 17-pin cable allows input of NTSC (National Television System Committee)/PAL (Phase Alternate Line) composite
video sources, and PC monitor output (4008/4208/5008/5208 = VGA output, 4012/4212/5012/5212 = XGA output). Marine Video inputs are
only available on the chartplotter to which they are attached and will not transmit over the Garmin Marine Network.
1 & 2.VIDEO1andVIDEO2Inputs(RCAconnectors)allowinputfromtwoseparateNTSC/PALcompatiblevideodevices,suchasVCR,
DVD, TV, or a video camera. The chartplotter can display one video input at a time or alternate between the two. See the Owner’s
Manual for details. Sound from a video source must be attached to a separate stereo/audio system. The video output from video device
attachestotheVideo1(BlackCable)orVideo2(GrayCable)RCAconnectors.
3. Use the PC monitor output (HD 15-pin) connector for remote viewing of the MFD display on a computer monitor. The remote monitor
must be capable of at least VGA resolution and have multi-sync capability.
Note Connector Pin Function
1 RCA-1
CENTER
2 VIDEO 1 IN (BLACK JACKET)
RCA-1 OUTER
6 VIDEO 1 IN, GND
2 RCA-2
CENTER
11 VIDEO 2 IN (GRAY JACKET)
RCA-2 OUTER
15 VIDEO 2 IN, GND
3 HD-15 PIN 1 1 VGA, ANALOG-RED
HD-15 PIN 2
4 VGA, ANALOG-GREEN
HD-15 PIN 3
3 VGA, ANALOG-BLUE
HD-15 PIN 5
13 VGA, ANALOG, GND
HD-15 PIN 6
8 VGA, ANALOG-RED, GND
HD-15 PIN 7
8 VGA, ANALOG-GREEN, GND
HD-15 PIN 8
8 VGA, ANALOG-BLUE, GND
HD-15 PIN 10
13 VGA, SYNC-GND
HD-15 PIN 13
7 VGA, H-SYNC
HD-15 PIN 14
12 VGA, V-SYNC
HD-15 PIN
SHELL
9 VGA, OVERALL SHIELD
1
3
2
PIN 1
PIN 2
PIN 7
PIN 17
1
3
2
PIN 1
PIN 2
PIN 7
PIN 17
Marine Video Cable
End View
Marine Video Cable
End View
 previous next