Garmin 750s Marine GPS System User Manual


  Open as PDF
of 100
 
GPSMAP 700 Series Owner’s Manual 45
Device Conguration
Display Conguration
Setting the Sound
You can set when the chartplotter makes audible sounds.
1. From the Home screen, select  >  > > .
2. Complete an action:
• Select to have the chartplotter beep only when alarms are triggered (default).
• Select to have the chartplotter beep when the screen is touched and when
alarms are triggered.
Setting the Language
You can select the language that appears on the chartplotter.
1. From the Home screen, select  >  > .
2. Select a language.
Navigation Preferences
Route Settings
Selecting a Route Label Type
You can select the type of labels shown with route turns on the map.
1. From the Home screen, select  >  > .
2. Complete an action:
• Select  to identify route turns using waypoint names.
• Select  to identify route turns using numbers, such as Turn 1 and Turn 2.
Conguring Route Turn Transitions
You can set how much time, or how far, before a turn in a route that you transition to the next leg. Raising
this value can help improve the accuracy of the autopilot when navigating a route or an Auto Guidance line
with many frequent turns, or at higher speeds. For straighter routes or slower speeds, lowering this value can
improve autopilot accuracy.
1. From the Home screen, select  >  > .
2. Complete an action:
• Select  > , and enter the time.
• Select  > , and enter the distance.
3. Select .
Conguring Speed Data Sources
You can specify the source of the speed data that is used to calculate true wind speed or fuel economy. Water
speed is the speed reading from a water-speed sensor, and GPS speed is calculated from your GPS position.
1. From the Home screen, select  >  > .
2. Complete an action:
• Select , and indicate if the calculated wind speed data comes from a  sensor, if it is
based on the , or whether the chartplotter selects a speed data source automatically.
• Select , and indicate whether the speed data that is used to calculate fuel economy
comes from a  sensor or is based on the .
Auto Guidance Line Congurations
You can set the parameters the chartplotter uses when calculating an Auto Guidance line.
: Auto Guidance is available with a preprogrammed BlueChart g2 Vision data card.
 previous next