Garmin GMI 10 Fish Finder User Manual


 
12 GMI 10 Quick Start Manual
Setting Alarms
1. To set alarms on the GMI 10,
from the instrument screen,
select Menu > Setup > Alarms.
2. Select from the following alarm
types. Select On and enter an
appropriate value.
Shallow Water—set an
alarm to sound when the
depth is less than the
specied value.
Deep Water—set an alarm
to sound when the depth is
greater than the specied
value.
Surface Temperature—set
an alarm to sound when
the transducer reports a
temperature that is 2°F
(1.1°C) above or below the
specied temperature.
Low Fuel—set an alarm
to sound when the fuel
remaining (based on fuel-ow
information from a GFS 10)
reaches the specied level.
Engine Status—set an alarm
to sound when an engine
indicates there is a problem.
Low Apparent Wind
Speed—set an alarm to
sound when the apparent
wind speed is at or below the
specied speed.
High Apparent Wind
Speed—set an alarm to
sound when the apparent
wind speed is at or above the
specied speed.
Low True Wind Speed—set
an alarm to sound when the
true wind speed is at or below
the specied speed.