Filter
Top Products
1A307431
Instruction Manual – Parts List Changes
This page contains a summary of changes or additions that do not appear in the contents
of the manu
al.
Models 221-074 and 221-026 are obsoleted per ECO V0411.
On Model 215-930, Part No. 167-669 Sleeve (Ref. No. 4) is replaced by Part No. 178-896 Sleeve, per ECO V1616.
Part No. 167-670 Displacement Rod (Ref. No. 17) is replaced by Part No. 178-895 Displacement Rod, per ECO
V1618.
Model 918-417 Series A Pump is added to the manual per ECOs V6073 and Z001124. Model 918-417 contains the
same parts as Model 215-930, including the changes above, with the following exceptions:
Ref. No. 6, Part No. 167-665 V-Packing: Change quantity to 10.
Ref. No. 10 is Part No. 167-667 Male Gland, quantity 2.
Ref. No. 11 is Part No. 167-664 Female Gland, quantity 2.
Ref. No. 13 is Part No. 617-582 Intake Housing, quantity 1.
Ref. No. 21 is Part No. 183-021 Ball Guide, quantity 1.
Ref. No. 22 is not used in Model 918-417.
In the Dimension Chart on page 10, enter the following values for Model 918-417:
Column A: 13.12 (333.2)
Column B: 10.29 (261.4)
Column C: None
Column D: 1/2 (f)
Column E: 5/8-11(m)
Column F: 0.406 (10.34)
In the Technical Data Chart on page 11, Model 918-417 has the same values as Model 215-930, except the
Maximum Working Pressure is 3000 psi (210 bar). This working pressure should also be noted on the front cover
and under the heading System Pressure in the Warnings section on page 2.