Graco 248205 Marine Sanitation System User Manual


 
10 310643
Service
Fig. 5. Remove piston rod and sleeve.
7746A
Fig. 5
Fig. 5. Invert piston rod and sleeve and pound on hard
surface until piston rod comes out of sleeve. Mark IV:
Remove sleeve spacer from sleeve.
Fig. 6
7572A
ti7339a
Fig. 7. Remove packing nut (202)
7726A
Fig. 7
202
Fig. 8. Invert piston rod and insert into cylinder to force
out throat packings.
Fig. 8
ti4258a
Fig. 9. Insert piston rod i nto cylinder with pin hole up
and piston valve down. Insert pin into piston rod and
crank shaft.
Fig. 9
ti4258a