Graco 24G787 Outboard Motor User Manual


 
Repair
10 3A1211M
Reassemble the Air Valve
1. Lubricate detent cam (104) and install into hous-
ing.
2. Lubricate the u-cups (108†) and install on the pis-
ton (102) with lips facing toward the center of the
piston.
3. Lubricate both ends of the piston (102) and install
it in the housing.
4. Lubricate and install the detent assembly (103)
into the piston.
5. Lubricate new o-rings (106†✠◆) and install on the
end caps (107). Install the end caps into the
housing.
6. Install a snap ring (110◆✠) on each end to hold end
caps in place.
FIG. 4. Air Valve
110◆✠
107
107
109†
105
112
111
103
102
ti11840a
101
104
110◆✠
1
1
1
1
1
1
Apply lubricant.
106†✠◆
106†✠◆
108†
108
1
FIG. 5. Air valve u-cup installation
Lips face down
Lips face up
108†
108†
102
ti12754a