Graham Field 14423-4 SONAR User Manual


  Open as PDF
of 44
 
14423-INS-LAB-RevD11 38
Info 1: At 80 MHz and 800 MHz, the higher frequency range applies.
Info 2: These guidelines may not apply in all situations. Electromagnetic
propagation is affected by absorption and reection from struc-
tures, objects and people.
a: Field strengths from xed transmitters, such as base stations for radio
(cellular/cordless) telephones and land mobile radios, amateur radio, AM
and FM radio broadcast and TV broadcast cannot be predicted theoreti-
cally with accuracy. To assess the electromagnetic environment due to
xed RF transmitters, an electromagnetic site survey should be consid-
ered. If the measured eld strength in the location in which the Grafco
Ultrasound Pocket Doppler is used exceeds the applicable RF compli-
ance level above, the Grafco Ultrasound Pocket Doppler should be ob-
served to verify normal operation. If abnormal performance is observed,
additional measures may be necessary, such as reorienting or relocating
the Grafco Ultrasound Pocket Doppler.
b: Over the frequency range 150 kHz to 80 MHz, eld strengths should
be less than 3 V/m.
RecommendedSeparationDistances
Recommendedseparationdistancesbetweenportable
andmobileRFcommunicationsequipmentandtheGrafco
UltrasoundPocketDoppler
The Grafco Ultrasound Pocket Doppler is intended for use in an
electromagnetic environment in which radiated RF disturbances are
controlled. The customer or the user of the device can help prevent
electromagnetic interference by maintaining a minimum distance between
portable and mobile RF communications equipment (transmitters) and the
Grafco Ultrasound Pocket Doppler as recommended below, according to the
maximum output power of the communications equipment.
Rated
maximum
outputpower
oftransmitter
(W)
Separationdistanceaccordingto
frequencyoftransmitter(m)
80MHzto800MHz
800MHzto2.5GHz
0.01 0.1167 0.2334
0.1 0.3689 0.7378
1 1.1667 2.3334
10 3.6893 7.3786
100 11.6667 23.3334
 previous next