4
Washing
After using in salt water or dirty water,
wash the Hobie MirageDrive™ with
metal parts with water-displacing oil
should be paid to threaded cable
Cable Adjustments
Determining if adjustment is needed...
Occasionally the cables may need to be
taut; however, the front chain should be a
with moderate pressure (see the image
not go beyond the inside edge of the
A
A
B
Drum Casting
inch open-end wrench, only giving it one-half a turn at a time,
idler pulley cable (see item B in the illustration below) will
be tightened automatically when the front chain assembly is
Miscellaneous Maintenance
CAUTION
the boat and insert the Drive into something solid, such as