Filter
Top Products
6
Up/Down Control Assembly
Up Control Line
Down Control Line
The down control
line passes around
the block mounted
on the inside of the
hull
Up/Down Handle
Control Arm
A Bungee cord fits is attached
to the down control line and fits
around the control arm post.
Pull more of this line to
get more DOWN tension.
Pull more of this line to get
more UP tension.
Steering Control Trim
The following is a detail of how the up/down rud-
der control is set up inside the kayak.
In order to have a good, responsive feel to
the steering, you may have to adjust the
tension of the steering lines from time to
time. Follow the diagram to the right for
tuning the steering lines.
Pull more of this line
and wrap it around the
screw to trim your boat
to the left.
Pull more of this line
to trim your boat to
the right.
These two screws hold the end of the
line in place. Turn back the screw a
couple of times to release the end of
the line and tighten the screws back
down to hold the line.