Filter
Top Products
Setting Up AppLock
MX7 Tecton devices are shipped to boot in
Administration mode. In this mode, the user has full
access to the device and no password is needed. After
the administrator completes the process below, the
MX7 Tecton switches to end-user mode and restricts
access to only the specified application(s).
1. Tap Start > Settings > Control Panel >
Administration icon.
2. Assign application(s) on the Application tab
screen.
3. Assign a password on the Security tab screen.
4. Select a view level on the Status tab screen, if
desired.
5. Tap OK.
6. Press the hotkey (Ctrl + Shift + A) sequence to
launch AppLock and lock the configured
application(s).
7. The device is now in end-user mode.