Filter
Top Products
ActiveSync using USB-Client Connection
The only connection type is USB Client.
1. Connect the MX8 end of the USB cable to the
I/O port on the bottom of the MX8.
2. Connect the USB type A connector on the I/O
cable to a USB port on a PC or laptop.
ActiveSync starts automatically when the USB cable is
connected.
When the MX8 loses connection (e.g., enters Suspend
Mode), the connection to ActiveSync is lost. When the
MX8 resumes, disconnect the PC end of the cable and
re-connect.
Please refer to the MX8 Reference Guide for
ActiveSync information.