Filter
Top Products
42
Select Views
(Advanced)
Select Views sets the available views to either hidden
or visible in the view rotation. The view will be
removed from the view rotation if it is set to Hidden
and will be displayed in the view rotation if it is set to
Visible. The following views are available:
• Sonar View
• Sonar Zoom View
• Big Digits View
• Circular Flasher
• Self Test
• Accessory Test
The display status of these views can be changed only when in Advanced User Mode
(see Setup Menu Tab: User Mode.)
To Select Views:
1. Make sure you are in Advanced User Mode, then highlight Select Views on the
Setup menu.
2. Use the RIGHT 4-WAY Cursor Control key to initiate this procedure.
3. The Select Views submenu will appear, showing a list of all Views that can be
hidden or made visible. Use the UP or DOWN Cursor keys to select a particular
view, then use the RIGHT or LEFT Cursor keys to change the View status from
Visible to Hidden or vice versa.
Select Views