Humminbird 3005 DEEP Marine GPS System User Manual


 
6
CONTROL PANELS
Control Panels provide access to important, but
infrequently-adjusted features, such as CHART SPEED,MODE,
S
ONAR VIEW,LIGHT,CONTRAST,RTS WINDOW,SURFACE CLUTTER,WHITE LINE,
F
ILTER,DEPTH ALARM,TEMP ALARM,FISH ALARM,FISH SENSITIVITY,FISH ID,
S
IMULATOR
,UNITS,
and, in International Models only, LANGUAGE.
Control Panels allow you to set the mode of operation
as well as additional features. Use the MODE to change
the bottom tracking and depth range method of
display, then use the other Control Panels to add
features to your selected mode of operation.
Note: Only the International Models (3005 and 3005 Deep)
contain a Language choice
in the Control Panel, and only
the
International Models support
multiple units of measure, such as
fathoms and metres.
Note: The Sonar View, Fish
ID, Fish Alarm, Fish
Sensitivity, and Filter
choices only appear on the Deep Model
Control Panels.
CONTROL PANELS are displayed by using
the CONTROL PANEL knob and adjusted
by using the RANGE knob. The active
CONTROL PANEL consists of three parts:
the CONTROL PANEL NAME, SETTING INDICATOR,
and SETTING READOUT.
The C
ONTROL
P
ANEL
N
AME
indicates the
feature, the S
ETTING
I
NDICATOR
shows the
current setting within the complete
range of adjustment, and the
S
ETTING
R
EADOUT
shows the status
when CONTROL PANEL is not
selected.
To select a CONTROL PANEL feature
for adjustment, follow these
steps:
1. Press the CONTROL PANEL knob. A list of
options appears on the display. The option currently
selected for adjustment is indicated by a white
background color.
2. Rotate the C
ONTROL PANEL knob
to select the desired
option for adjustment. Clockwise rotation selects
options higher in the list; counterclockwise rotation
selects options lower in the list.
Note: Not all options in the list can be viewed on the display at
one time. When the selected option is at the bottom of the list,
continue turning the knob to display other options.
3.
Once the desired option is selected, turn the
R
ANGE
knob
to adjust. Adjustments are made immediately and are
shown by an indicator on the selected C
ONTROL
P
ANEL
.
4.
Remove the CONTROL
PANELS
by pushing the CONTROL
PANEL
knob. Alternately, after a few seconds with no knob
press/turn activity, the CONTROL
PANELS
are removed from
the display automatically.
Mode
The first Control Panel to set
is Mode. Three modes of
operation control the
method used by the Legend 3000 Series to track the
bottom, select depth ranges and graph the
information on the LCD display. The Mode is selected
by changing the Control Panel setting to Auto,
Manual, or BTM Lock (Bottom Lock).
Automatic Mode
AUTOMATIC MODE follows the bottom contour, changing
depth ranges as needed to keep the most recent sonar
returns visible on the display. AUTOMATIC MODE keeps the
acquired bottom visible at all times, showing sonar
returns from the surface to the bottom and just
beyond. This is useful when traveling across the water
in areas where the depth constantly changes, requiring
frequent range changes.
USING THE LEGEND 3000 SERIES
SONAR VIEWS / CONTROL PANELS
Active
Control Panel
Control
Panel Name
Setting
Readout
Setting
Indicator