Filter
Top Products
View
Press the VIEW key to advance to the next view. Repeatedly pressing VIEW cycles through all views available. Views can be hidden to optimize the system to
your fishing requirements (see System Setup Menu - Advanced User Mode on the other side of this manual).
Exit
The EXIT key has multiple functions, depending on the
situation:
• If an alarm is sounding, pressing EXIT will cancel the
alarm.
• If a menu tab is selected, pressing EXIT will exit the
menu mode and return to the view.
• If a menu is active, pressing EXIT will return to the
previous level in the menu system.
• If a cursor is active on the display, pressing EXIT will
clear the cursor from the display.
Main Menu System
Press the MENU key twice for the Main
Menu System. The menu system is organ-
ized under tab headings to help you find a
specific menu item quickly. In the main
Menu, first use the 4-Way Menu Control
LEFT or RIGHT key to select a tab; then use
the UP or DOWN key to select the menu
item. The menu system is expandable;
when you attach a supported accessory to the Matrix system, the
Matrix menus may change to display new choices for those acces-
sories that require menu access.
Note: Instruction guides included with the accessory will detail accessory-specific
features and functions.
-Way Menu Control
Use UP or DOWN to select a
menu item. Use LEFTor RIGHT to
make a menu choice.
Note: Menu choices are implemented
and saved immediately - no further
action is required.
X-Press
TM
Menu
Sensitivity
Adjusts the sonar Sensitivity
(Low = 1, High = 10, Default=6)
Beam Select Selects the sonar beam used in the Sonar View.
(200 kHz, 83 kHz, Default=200 kHz)
Lower Range Adjusts the Lower Depth Range
(Auto, 10 to 1200 feet, Default=Auto)
Chart Speed
Adjusts the speed of the display movement
(1 to 5 or Ultra, where 1=Slow, 5=Fast,
Ultra=Fastest, Default=5)
Zoom Level
Adjusts the zoom magnification for Zoom View
(2x, 4x, 6x, 8x, Default=2x)
NOTE:The following additional menu items are available when Advanced User Mode is
enabled: Upper Range, 83kHz Sensitivity and 455 kHz Sensitivity (depending on the cur-
rent view). See Advanced User Mode section.
Sonar Main Menu
Fish ID+
TM
Activates Fish ID+ target identification
and fish symbols
(On, Off, Default=Off)
Fish Sensitivity
Adjusts the fish detection sensitivity
(Low = 1, High = 10, Default=5)
Bottom View
Selects style of bottom presentation for
Sonar Views (Structure ID®, WhiteLine®,
Bottom Black, Default=Structure ID®)
RTS® Window
Activates the Real Time Sonar Window on Sonar
Views (On/Off, Default=On)
Note: The following additional menu items are available when Advanced User Mode is
enabled: Surface Clutter, Noise Filter, Water Type and Max Depth. See Advanced User
Mode section.
Alarm Main Menu
Depth Alarm
Sets the Depth Alarm point
(Off, 1 to 100 feet, Default=Off)
Fish Alarm
Sets the Fish Alarm size
(Off, All, Large/Med, Large, Default=Off)
Low Battery Alarm
Sets the Low Battery Alarm point
(Off, 8.5 to 17.5 Volts, Default=Off)
Alarm Tone
Sets the pitch of the alarms
(Low, Medium, High, Default=Medium)
System Setup Main Menu
Units - Depth
Selects the unit of measure for depth
(Feet, Meters*, Fathoms, Default=Feet)
Units - Temperature*
Selects the unit of measure for temperature
(Fahrenheit/Celsius, Default=Celsius)
Units - Distance**
Selects the unit of measure for distance
(sm, nm, km*, Default=sm)
Units - Speed**
Selects the unit of measure for speed
(mph, kts, kph*, Default=mph)
User Mode
Selects the user mode menus
(Normal, Advanced, Default=Normal))
Triplog Reset**
Resets the Triplog to zero
Language*
Selects the menu display language
(Default: English)
Restore Defaults
Restores all settings to the Factory Defaults
Note: The following additional menu items are available when Advanced User Mode
is enabled: Select Views, Select Readouts, Depth Offset, Temperature Offset, Speed
Calibration** and NMEA Output. See Advanced User Mode section.
*Note: Menu item available on International models only.
**Note: Menu item available with Temp/Speed Accessory only.
Power/Light
Momentarily press POWER to turn the unit on. While the unit is on,
momentarily press POWER to access Light and Contrast menus. Press
and hold POWER for 3 seconds to turn the unit off.
X-Press
TM
Menus
Press the MENU key once for the
X-Press
TM
Menu. The X-Press menu
allows you to access the settings that
you change frequently without having
to navigate through a menu system.
Only the X-Press menu items associated
with the current view are displayed.
Quick Disconnect
Mounting System
Press the button located to the rear of your Matrix unit to
release the lock and remove the head unit from the base.
Tilt and Swivel Mount
Your Matrix unit will tilt up to 90° and swivel up to 360° to accommo-
date your viewing preferences.
MultiBeam Sonar View
Your Matrix unit represents a revolutionary Fishing System that grows in capa-
bility with the addition of one or more accessories. Accessories customize the
Matrix Fishing System to your needs and enable you to stay on the edge of new
technology and to catch more fish. When an accessory is connected to the sys-
tem, additional menus, readouts and views are added automatically to your
Matrix menu system. Note that some accessories may require additional soft-
ware to be loaded into the Matrix product. Accessories available today that are
supported by your Matrix include:
Temperature/Speed: simply plugs into the Matrix unit and provides real time
speed and temperature readouts, as well a valuable Triplog function.
Note: If an external Temperature/Speed (TS-W) or Temperature (TG-W) accessory is con-
nected AND a transducer with temperature built in is connected at the same time, the TS-
W or TG-W accessory will override the temperature which is built in to the transducer.
WeatherSense™ Fishing Condition Monitor: simply plugs in to the Matrix unit
and provides barometric pressure readout and trend data. Professional fisher-
men know that barometric pressure impacts fish behavior and they modify
their tactics based on it. Now you can have access to barometric pressure data
in real time, right on the boat.
GPS Connection Cable: adds GPS capability to the Matrix unit by connecting a
handheld or other NMEA* GPS-compatible device. GPS capability instantly turns
your Matrix into a Combo-Trackplotter to show position, breadcrumb trail and
waypoints on the big, easy-to-read screen, all with big, easy-to-use buttons that
handhelds do not offer. In addition, you can store up to 750 waypoints and 10
tracks inside the Matrix unit!
PC Connect Cable: links the Matrix unit to a PC to access product software
updates and new features from www.humminbird.com. This accessory requires
the MSWindows-compatible HumminbirdPC™ software from our Website to
communicate with the Matrix unit. If you have upgraded to GPS, you can easily
enter, annotate and exchange fishing spots with friends and download them
into your Matrix unit using this cable.
Be sure to check out our website www.humminbird.com for additional new and
exciting accessories to grow your Matrix Fishing System!
*NMEA 0183 is a National Marine Electronics Association standard for data communication.
Matrix Fishing System Advanced Accessories
Sonar View Zoom View Big Digits View