Filter
Top Products
28
Create a route: From the Routes submenu, select Create and press the RIGHT
Cursor key. A Route Edit screen will be displayed with an empty route. You can
name the route, add waypoints to the route from the list of all waypoints, and
order the waypoints in the route using the Cursor keys.
Edit a saved route: From the Routes submenu, select Edit and press the RIGHT
Cursor key. A Route Edit screen will be displayed. Select the route you wish to
edit and press the RIGHT Cursor key. Re-name the route or change, delete or
re-order the waypoints used in the route.
Delete a saved route: From the Routes submenu, select Delete and press the
RIGHT Cursor key. Select the route you wish to delete and press the RIGHT
Cursor key. You will be asked to confirm your choice by pressing the RIGHT
Cursor key again before the route is deleted.
Travel a saved route: From the Routes submenu, select Travel and press the RIGHT
Cursor key. A list of saved routes will appear. Select the route you wish to travel
and press the RIGHT Cursor key to make this route the current route and begin
navigation. You may also travel the route in either forward or reverse order.
Route Info: From the Routes submenu, select Info and press the RIGHT Cursor
key. A list of saved routes will appear. Select the route for which you want
information, and press the RIGHT Cursor key. The list of waypoints in the route
will be shown, with the distance and bearing from each waypoint to the next,
as well as the distance and bearing from the current position to the first
waypoint in the route.
Save or Clear a Current Track
Save the current track: From the Navigation X-Press™ menu, select Save
Current Track and press the RIGHT Cursor key. The track will remain on the
display, but will change from black to gray. To remove the track completely from
the display, see Edit, Delete or Hide Saved Tracks.
NOTE: When you save a track, a name is automatically assigned. The track name consists of
a date/time stamp, but can be re-named later (see Edit a Saved Track).
Clear the current track: From the Navigation X-Press™ menu, select Clear
Current Track and press the RIGHT Cursor key. The track will be removed from
the display and discarded.