Filter
Top Products
NOTE: The last function you select remains “active”- that is, you can adjust it without having to
press SELECT again. For example, if the bottom alarm was the last function used, you can
readjust the alarm by pressing one of the arrow buttons. Or, if you often use Zoom, you can
select it once, then switch it on and off simply by pressing ON-OFF.
ID
1. Selecting ID;
Factory Setting: Fish symbols
ID identifies targets not attached to the bottom and displays them with either a fish
symbol or an arch. Three different size symbols are used to represent the returned signal
strength, a good indicator of fish size. Use the up and down arrow keys to switch between fish or
arches, or use the ON-OFF key to disable ID.