Filter
Top Products
Press MENU until the Options menu is on-screen. There are two choices, Hide (Factory Setting)
and Show. Use the DOWN ARROW to highlight Show and the first Options menu appears.
Units
The Units function allows the user to select the units of
measurement for the speed readout. Both MPH or statute miles
per hour and KTS or nautical miles per hour are available. Use the
ARROW buttons to highlight the desired selection. The ProAngler
remembers this selection even when the unit is powered off.
Press MENU to go to the next menu.
Fish ID
The next Option menu is Fish ID. There are three selections available; Off,
ID+ ON, and Adjust. The factory setting is ID+ On. With Fish ID Off, sonar
returns are displayed as "raw" information. There is no interpretation made
by the unit. Selecting ID Off, will also disable the fish alarm.
ID+ On enables the ProAngler to interpret the raw sonar data and, using a
variety of techniques, depict appropriate target returns as one of three
different size fish symbols. Further identification shows whether the fish is in
the wide or narrow beam. The ProAngler will also attach The depth beneath the surface to the
selected fish symbol.
Selecting Adjust and making incremental changes enhances the fishfinder's
ability to identify sonar returns as fish symbols.
Increasing the value to a number greater than zero, will show more fish
symbols on-screen. In this case smaller sonar returns will be depicted as fish
symbols. This is useful for identifying many smaller sonar returns (such as
baitfish) as fish symbols.
Decreasing the value to a number less than zero will show fewer fish symbols
onscreen. In this case smaller sonar returns will be disregarded. This is useful
for eliminating many small sonar returns when seeking larger species of fish. The ProAngler
remembers this selection even when the unit is powered off. Press MENU to go to the next menu.
Numeral Size
Numeral Size is the next Option menu. Two options are available:
Big and Small. The factory setting is Big. With this setting, the
digital depth and speed and temp numerals are drawn large
enough to be readable from across the boat. The big numerals
occupy space on the display which could be used for the graphics
area. Hence, the small numerals option. With small numerals
selected, a greater amount of the display area is available for the
graphic view. This effectively increases the display resolution of the unit.
Use the UP and DOWN ARROW buttons to highlight the desired selection, then press MENU to
advance to the next menu.
Numeral Size settings are remembered when powered off.