Filter
Top Products
5
RECEIVE AND TRANSMIT
10
q Push and hold [MODE] 1sec.
to open the squelch.
• Adjust volume to the desired
audio level. (See p. 8)
w Select a desired operating channel.
When a signal is received:
• Squelch opens and audio is emitted
from the speaker.
• Further adjustment of [
VOL] may be
necessary at this point.
• “BUSY” indicator appears on the dis-
play.
e Push and hold [
PTT] to transmit then
speak into the microphone.
• Do not hold the transceiver too close
to your mouth or speak too loudly.
This may distort the signal.
• The transmit indicator “ ” appears
on the display.
r Release [
PTT
] to return to receive.
IMPORTANT:
To maximize the readability of your transmitted signal, pause a
few sec. after pushing [
PTT
], hold the transceiver 4 to 6 inches
(10 to 15 cm) from your mouth and speak at a normal voice
level.
NOTE:
The transceiver has an auto power save function to conserve
the battery power. The power save function activates automati-
cally when no signal is received for 5 sec.
UP
DOWN
M
O
D
E
P
O
W
E
R
UP
DOWN
M
O
DE
P
O
W
E
R
Busy indicator
appears.
IC-4008E-2 02.3.23 3:26 PM Page 15 (1,1)