Filter
Top Products
9
2
PANEL DESCRIPTION
2
SCAN B START/STOP KEY
➥ Push to start and cancel scanning operation. Scan resumes
after a specified time period has passed when scan is cancelled
except for this key.
➥ Push and hold this key for 1 sec. to indicate the scan group, then
select the desired scan group using [CH Up]/[CH Down].
SCAN ADD/DEL (TAG) KEY
➥ Push to add or delete the selected channel to/from the scan
group.
1. Push to indicate the scan group, then push [CH Up] or [CH Down]
to select the desired group.
2. Push to add or delete the channel to/from the selected scan group.
3. Push and hold for 1 sec. to exit the scan group selection mode.
➥ Push this key while scan is paused (a signal is detected) on a
channel (except for priority channel,) the channel is cleared from
the scan group.
Depending on the setting, the cleared channel is added to the
scan group again after the scan is cancelled. (Nuisance
Delete function)
PRIORITY CHANNEL KEYS
➥ Push to select Priority A or Priority B channel.
➥ Push and hold [Prio A (Rewrite)] or [Prio B (Rewrite)] to set the
operating channel as the Priority A or Priority B channel.
MR-CH 1/2/3/4 KEYS
Push to select the memory channel 1 to 4 directly.
LOCK KEY
Push and hold to toggle the key lock function ON or OFF.
• All programmable keys except the followings are electronically locked
when the key lock function is activated: [PTT], [Light], [Lone Worker], [Sur-
veillance], [Call] (incl. Call A and Call B), [Moni(Audi)] and [Emergency].
! IC-F50V_F60V_0.qxd 07.8.6 10:36 AM Page 9 (1,1)