Filter
Top Products
17
6
DSC OPERATION
6
■ Transmitting DSC calls
To ensure correct operation of the DSC function, please
make sure you set the squelch correctly. (p. 7)
D Transmitting Individual call
The Individual call function allows you to transmit a DSC sig-
nal to a specific ship only.
q Push [DSC] to enter the DSC menu.
• “ ” scrolls at the channel comment indicator.
w Push [DSC] to select the desired pre-programmed individ-
ual address using [Y] or [Z], then push [DSC].
• The ID code for the individual call must be set in advance.
(p. 14)
e Push [Y] or [Z] to select a desired intership channel, push
[DSC].
• Intership channels are already preset into the transceiver in rec-
ommended order.
• Channel 70 is selected and “ ” appears after pushing
[DSC].
r Push [DSC] to transmit the Individual call.
• If Channel 70 is busy, the transceiver stands by until the channel
becomes clear.
• Routine category only is available.
When Ch 70 is busy.While transmitting
Scrolls