Ingersoll-Rand 650944-X-B Marine Sanitation System User Manual


  Open as PDF
of 2
 
CCN 99685208
OPERATOR’S MANUAL 650944-X-B
RELEASED: 8-1-97
REVISED: 10-12-11
(REV. F)
2.062 SQ.” HYDRAULIC MOTOR
3.3:1 RATIO
6” STROKE
INCLUDE MANUALS: 66301-X Lower Pump End (pn 97999-647), 67147-B Hydraulic Motor (pn 97999-1219)
& S-632 General Information Manual (pn 97999-624)
INCLUDING: SPECIFICATIONS, SERVICE KITS, GENERAL INFORMATION, TROUBLESHOOTING.
650944-XXX-B
TWO BALL PUMP SERIES
300 SERIES STAINLESS STEEL
READ THIS MANUAL CAREFULLY BEFORE INSTALLING,
OPERATING OR SERVICING THIS EQUIPMENT.
It is the responsibility of the employer to place this information in the hands of the operator. Keep for future reference.
SERVICE KITS
• Use only genuine AROR replacement parts to assure compatible
pressure rating and longest service life.
• 637449 for repair of hydraulic motor section.
• 637306-X43 for repair of lower pump section. Refer to the chart
on page 2 for description of -XXX options.
SPECIFICATIONS
Model Series (refer to option chart) 650944-XXX-B. . . . . . . .
Type Hydraulically Operated, Two Ball. . . . . . . . . . . . . . . . . . . .
Ratio 3.3:1. . . . . . . . . . . . . . . . . . . . . . . . .
Hydraulic Motor 67147-B. . . . . . . . . . . . . . . . .
Motor Repair Kit 637449. . . . . . . . . . . . . . .
Motor Size 2.062 sq." (13.3 sq. cm). . . . . . . . . . . . . . . . . . .
Stroke 6" (15.2 cm). . . . . . . . . . . . . . . . . . . . . .
Hydraulic Inlet (female) 3/8 - 18 N.P.T.F. - 2. . . . . . . . . .
Hydraulic Return (female) 1/2 - 14 N.P.T.F. - 2. . . . . . . .
Lower Pump End Series 66301-XXX. . . . . . . . . .
Lower Pump Repair Kit 637306-X43. . . . . . . . .
Material Inlet (female) 1 - 11-1/2 N.P.T.F. - 1. . . . . . . . . . .
(male) 2 - 11-1/2 P.T.F. (short). . . . . . . . . . . .
Material Outlet (female) 1 - 11-1/2 N.P.T.F. - 1. . . . . . . . .
Weight 41.3 lbs (18.7 kgs). . . . . . . . . . . . . . . . . . . . . . . .
PERFORMANCE
Hydraulic Inlet Pressure Range 50 - 1200 p.s.i. (3.4 - 82.8 bar).
Fluid Pressure Range 165 - 3960 p.s.i. (11.4 - 273.1 bar). . . . . .
Required H-power @ 50 c.p.m. 3.2 @ 1200 (82.8 bar). . . . . .
Hydraulic flow required @ 50 c.p.m. 4.9 g.p.m. (18.5 l.p.m.).
Maximum rec’d Cycles / Minute 50. . . . .
Displacement In
3
Per Cycle 7.434. . . . . . . .
Volume / Cycle 4.1 oz. (121.8 ml). . . . . . . . . . . . . . . . . .
Cycles Per Gallon 31.1. . . . . . . . . . . . . . .
Flow @ 50 Cycles / Minute 1.6 g.p.m. (6.1 l.p.m.). . . . . . . . .
Noise Level N/A. . . . . . . . . . . . . . . . . . . .
Maximum Temperature Limit 130_ F (54_ C). . . . . . .
PUMP DATA
Hydraulic Motor 67147-B
(see manual 67147-B)
Figure 1
Material Outlet (female)
1 - 11-1/2 N.P.T.F. - 1
90_ from hydraulic inlet
Lower Pump 66301-XXX
(see manual 66301-X)
Spacer Section
42-7/32"
(1072.0 mm)
27-27/32"
(706.9 mm)
12-11/16"
(321.6 mm)
Accessories available: 67069 wall bracket.
Spacer Rod 94253 (3)
Connector (see Figure 2)
MODEL 650944-XXX-B
Screw 93342-1 (3)
Washer Y79-625 (3)
1 - 11-1/2 N.P.T.F. - 1 (female)
2 - 11-1/2 P.T.F. SAE short (male)
Hydraulic Outlet (female)
1/2 - 14 N.P.T.F. - 2
Hydraulic Inlet (not shown)
3/8 - 18 N.P.T.F. - 2 (female)
IMPORTANT
This is one of the four documents which support the pump. Re-
placement copies of these forms are available upon request.
= 650944-X-B Model Operator’s Manual (pn 97999-740)
- S-632 General Information - Industrial Piston Pumps (pn 97999-624)
- 66301-X Lower Pump End Operator’s Manual (pn 97999-647)
- 67147-B Hydraulic Motor Operator’s Manual (pn 97999-1219)
INGERSOLL RAND COMPANY LTD
209 NORTH MAIN STREET – BRYAN, OHIO 43506
(800) 495-0276 FAX(800) 892-6276
© 2011
www.ingersollrandproducts.com