Ingersoll-Rand 650950-X Marine Sanitation System User Manual


  Open as PDF
of 2
 
CCN 99745465
OPERATOR’S MANUAL 650950-X
RELEASED: 8-28-98
REVISED: 10-12-11
(REV. F)
2.062 SQ.” HYDRAULIC MOTOR
0.2:1 RATIO
5.75” STROKE
INCLUDE MANUALS: 6720X-X Lower Pump End (pn 97999-788), 67147-B Hydraulic Motor (pn 97999-1219) &
S-632 General Information Manual (pn 97999-624)
INCLUDING: SPECIFICATIONS, SERVICE KITS, GENERAL INFORMATION, TROUBLESHOOTING.
650950-X4X
FOUR BALL PUMP SERIES
300 SERIES STAINLESS STEEL
READ THIS MANUAL CAREFULLY BEFORE INSTALLING,
OPERATING OR SERVICING THIS EQUIPMENT.
It is the responsibility of the employer to place this information in the hands of the operator. Keep for future reference.
SERVICE KITS
• Use only genuine AROR replacement parts to assure compatible
pressure rating and longest service life.
• 637449 for repair of hydraulic motor section.
• 637318-X4B for repair of lower pump section. Refer to the chart
on page 2 for description of -X4X options.
SPECIFICATIONS
Model Series (Refer to option chart) 650950-X4X. . . . . . . .
Type Hydraulically Operated, Four Ball. . . . . . . . . . . . . . . . . . . .
Ratio 0.2:1. . . . . . . . . . . . . . . . . . . . . . . . .
Hydraulic Motor 67147-B. . . . . . . . . . . . . . . . .
Motor Repair Kit 637449. . . . . . . . . . . . . . .
Motor Size 2.062 sq." (13.3 sq. cm). . . . . . . . . . . . . . . . . . .
Stroke 5.75" (14.6 cm). . . . . . . . . . . . . . . . . . . . . .
Hydraulic Inlet (female) 3/8 - 18 N.P.T.F. - 2. . . . . . . . . .
Hydraulic Return (female) 1/2 - 14 N.P.T.F. - 2. . . . . . . .
Lower Pump End Series 67201-X4X. . . . . . . . . .
Lower Pump Repair Kit 637318-X4B. . . . . . . . .
Material Inlet (female) 1-1/2 - 11-1/2 N.P.T.F. - 1. . . . . . . . . . .
(male) 2 - 11-1/2 P.T.F. SAE Spec Short. . . . . . .
Material Outlet (female) 1 - 11-1/2 N.P.T.F. - 1. . . . . . . . .
Weight 72 lbs (32.7 kgs). . . . . . . . . . . . . . . . . . . . . . . .
PERFORMANCE
Hydraulic Inlet Pressure Range 50 - 1200 p.s.i. (3.4 - 82.8 bar).
Fluid Pressure Range 10 - 278 p.s.i. (0.69 - 19.2 bar). . . . . . . .
Required H-power @ 50 c.p.m. 3.2 @ 1200 p.s.i. (82.8 bar). . . .
Hydraulic flow required @ 50 c.p.m. 4.9 g.p.m. (18.5 l.p.m.).
Maximum rec’d Cycles / Minute 50. . . . .
Displacement In
3
Per Cycle 103.6. . . . . . . .
Volume / Cycle 57.4 oz. (1697.2 ml). . . . . . . . . . . . . . . . . .
Cycles Per Gallon 2.23. . . . . . . . . . . . . . .
Flow @ 50 Cycles / Minute 22.4 g.p.m. (84.9 l.p.m.). . . . . . . . .
Noise Level N/A. . . . . . . . . . . . . . . . . . . .
Maximum Temperature Limit 130_ F (54_ C). . . . . . .
PUMP DATA
Hydraulic Motor 67147-B
(see manual 67147-B)
Figure 1
Material Outlet (female)
1 - 11-1/2 N.P.T.F. - 1
(152_ from hydraulic inlet)
Material Inlet
Lower Pump 67201-X4X
(see manual 6720X-X)
Hydraulic Outlet (female)
1/2 - 14 N.P.T.F. - 2
Spacer Section
45-5/16"
(1150.3 mm)
30-15/16"
(785.2 mm)
19-9/16"
(496.3 mm)
1-1/2 - 11-1/2 N.P.T.F. - 1 (female)
2 - 11-1/2 P.T.F. SAE Spec. Short (male)
Accessories available: 61937-1 wall bracket, 67187-2 mounting post.
Screw 93342-1 (3)
Washer Y79-625 (3)
Spacer Rod 94253 (3)
Connector (see figure 2)
MODEL 650950-X4X
Hydraulic Inlet (not shown)
3/8 - 18 N.P.T.F. - 2 (female)
IMPORTANT
This is one of the four documents which support the pump. Re-
placement copies of these forms are available upon request.
= 650950-X Model Operator’s Manual (pn 97999-795)
- S-632 General Information - Industrial Piston Pumps (pn 97999-624)
- 6720X-X Lower Pump End Operator’s Manual (pn 97999-788)
- 67147-B Hydraulic Motor Operator’s Manual (pn 97999-1219)
INGERSOLL RAND COMPANY LTD
209 NORTH MAIN STREET – BRYAN, OHIO 43506
(800) 495-0276 FAX(800) 892-6276
© 2011
www.ingersollrandproducts.com