Filter
Top Products
INGERSOLL RAND COMPANY LTD
209 NORTH MAIN STREET – BRYAN, OHIO 43506
(800) 495-0276
y
FAX (800) 892-6276
© 2010 CCN 15337918
www.ingersollrandproducts.com
OPERATOR’S MANUAL 670106
INCLUDING: OPERATION, INSTALLATION & MAINTENANCE
RELEASED: 3-30-10
(REV. 01)
3" DIAPHRAGM PUMP
1:1 RATIO, METALLIC
READ THIS MANUAL CAREFULLY BEFORE INSTALLING,
OPERATING OR SERVICING THIS EQUIPMENT.
It is the responsibility of the employer to place this information in the hands of the operator. Keep for future reference.
SERVICE KITS
Refer to Model Description Chart to match the pump mate-
rial options.
637421 for air section repair (see page 6).
637303-TA for uid section repair (see page 4).
PUMP DATA
Models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 670106
Pump Type . . . . . . . . . . . . . . . Air Operated Double Diaphragm
Material . . . . . . . . . . . . . . . . . . see Model Description Chart
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 245.60 lbs (111.4 kgs)
Maximum Air Inlet Pressure . . . . . . . . 120 p.s.i.g. (8.3 bar)
Maximum Material Inlet Pressure . . . 10 p.s.i.g. (0.69 bar)
Maximum Outlet Pressure . . . . . . . . . . 120 p.s.i.g. (8.3 bar)
Maximum Flow Rate . . . . . . . . . . . . . . . . 237 g.p.m. (897 l.p.m.)
( ooded inlet)
. . . . . . . . . . . . . . . 275 g.p.m. (1041 l.p.m.)
Displacement / Cycle @ 100 p.s.i.g. . 2.8 gal. (10.6 lit.)
Maximum Particle Size . . . . . . . . . . . . . 3/8” dia. (9.5 mm)
Maximum Temperature Limits (diaphragm / ball / seal /
seat material)
Santoprene® . . . . . . . . . . . . . . -40° to 225° F (-40° to 107° C)
PTFE. . . . . . . . . . . . . . . . . . . . . . 40° to 225° F (4° to 107° C)
Dimensional Data . . . . . . . . . . . . . . . . . . . see page 8
Noise Level @ 70 p.s.i., 50 c.p.m.
c
. . . 83.0 db(A)
d
c
Tested with 67263 muffler assembly installed.
d
The pump sound pressure levels published here have been updated to
an Equivalent Continuous Sound Level (L
Aeq
) to meet the intent of ANSI
S1.13-1971, CAGI-PNEUROP S5.1 using four microphone locations.
MODEL DESCRIPTION CHART
Air Motor / Air Cap Material
Aluminum / Aluminum
Fluid Connection
3" A.N.S.I / DIN Flange
Fluid Cap & Manifold Material
Stainless Steel
Hardware Material
Stainless Steel
Seat Material
316 Stainless Steel
Ball Material
PTFE
Diaphragm Material
Santoprene
Figure 1