Ingersoll-Rand LM2250E-XX-B3 Marine Sanitation System User Manual


 
INGERSOLL RAND COMPANY LTD
209 NORTH MAIN STREET – BRYAN, OHIO 43506
(800) 495-0276
y
FAX (800) 892-6276
© 2011 CCN 15292261
www.ingersollrandproducts.com
OPERATOR’S MANUAL LM2250E-XX-B3
INCLUDING: SPECIFICATIONS, SERVICE KITS, GENERAL INFORMATION, TROUBLESHOOTING.
INCLUDE MANUALS: S-632 General Information Manual (pn 97999-624).
RELEASED: 6-18-08
REVISED: 8-1-11
(REV. 04)
LM2250E-XX-B3
CHOP-CHECK GREASE PUMP
READ THIS MANUAL CAREFULLY BEFORE INSTALLING,
OPERATING OR SERVICING THIS EQUIPMENT.
It is the responsibility of the employer to place this information in the hands of the operator. Keep for future reference.
2” AIR MOTOR
50:1 RATIO
0 - 7500 P.S.I. RANGE
"A"
"B"
1-1/4"
(31.3 mm)
SERVICE KITS
Use only genuine ARO® replacement parts to assure compat-
ible pressure rating and longest service life.
637332 pump rebuild kit. Includes the necessary soft parts for
normal service of the entire pump.
SPECIFICATIONS
Model Series
(refer to option chart)
. . . . . . . . . . . LM2250E-XX-B3
Pump Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Air Operated, Chop-
Check Grease Pump
Ratio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50:1
Air Motor Diameter . . . . . . . . . . . . . . . . . . . . . . 2” (5.08 cm)
Stroke (double acting) . . . . . . . . . . . . . . . . . . . 3” (7.62 cm)
Air Inlet (female) . . . . . . . . . . . . . . . . . . . Rp 1/4 (1/4 - 19 BSP Parallel)
Material Outlet (female) . . . . . . . . . . . . Rc 3/8 (3/8 - 19 BSP Taper)
Pump Construction . . . . . . . . . . . . . . . . . . . . . . Carbon Steel
Dimensional Data . . . . . . . . . . . . . . . . . . . . . . . . see chart
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . see chart
PUMP PERFORMANCE
Air Inlet Pressure Range . . . . . . . . . . . 0 - 150 p.s.i.g. (0 - 10.3 bar)
Fluid Pressure Range . . . . . . . . . . . . . . 0 - 7500 p.s.i.g. (0 - 517.2 bar)
Cycles / Minute Rec’d @ Working Flow . . . 80
Displacement In. Per Cycle . . . . . . . . . . . . . . 0.300
Volume / Cycle . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.17 oz. (4.91 ml)
Maximum Delivery / Minute . . . . . . . . . . . . . 9 lbs (4.1 kgs)
Noise Level @ 100 p.s.i. . . . . . . . . . . . . . . . . . . 85.0 db(A)
c
Accessories Available . . . . . . . . . . . . . . . . 61113 Wall Mount Bracket
66073-1 Air Line Connection Kit
c
The pump sound pressure level has been updated to an Equivalent Continuous
Sound Level (LAeq) to meet the intent of ANSI S1.13-1971, CAGI-PNEUROP S5.1
using four microphone locations.
GENERAL DESCRIPTION
Model LM2250E-XX-B3 series chop-check grease pump is intended
to be used primarily for grease delivery systems. It uses carbon
steel and other materials which make it compatible with most pe-
troleum based lubrication products.
NOTE: If this pump was purchased separately (not part of a system),
consult your sales representative for compatible dispensing acces-
sories which will best match the application. All accessories must
be able to withstand the maximum pressure developed by the
pump.
y
y
PUMP DATA
Figure 1
MODEL LM2250E-XX-B3
NOTE: Dimensions are shown in inches and (mm) and are supplied for reference only.
Air Inlet (female)
Rp 1/4 (1/4 - 19 BSP parallel)
Material Outlet (female)
Rc 3/8 (3/8 - 19 BSP taper)
2 - 11-1/2 N.P.S.M.
Model Number "A"
(mm)
"B"
(mm)
Weight
(kg)
LM2250E-22-B3 27-3/4"
(704.2)
16-9/16"
(420.6)
15 lbs
(6.8)
LM2250E-32-B3 40-1/2"
(1028.1)
29-5/16"
(744.5)
19 lbs
(8.6)
LM2250E-42-B3 49"
(1244.0)
37-13/16"
(960.4)
21.5 lbs
(9.8)
LM2250E-62-B3 30-1/2"
(774.1)
19-5/16"
(490.5)
15.9 lbs
(7.2)
IMPORTANT
This is one of two documents which support the pump. Re-
placement copies of these forms are available upon request.
:
LM2250E-XX-B3 Model Operator’s Manual (pn 97999-1343)
S-632 General Information - Air Operated Lubrication Piston
Pumps (pn 97999-624)
5/16” (8 mm) thru hole