Filter
Top Products
2
INSTALLATION PREPARATION
PARTS SUPPLIED
PARTS SUPPLIED
Before installing your 450TX, please ensure the following parts are included
in the box:
• 450TX fishfinder
• Transducer with 6m (20') of cable and mounting hardware kit
• Mounting system and mounting hardware kit
• 2m (6') power cable
• Publications kit
If any of these items is missing, contact your local distributor.
ACCESSORIES
Humminbird offers a wide assortment of accessories that complement and
expand the capability of your new 450TX. These accessories are designed
with the same high standards and are backed by the same one-year
warranty. The Humminbird Accessory catalog included with your unit
contains descriptions of the many accessories available and ordering
information. All Humminbird accessories are available through your full-
service Humminbird dealer.
INSTALLATION OVERVIEW
The 450TX consists of two primary components to install: the control head
and the transducer.
The control head contains the sonar transmit and receive circuitry, as well
as the user controls and display. It should be installed in a location that
provides access to the controls and visibility while in use. The control head
mounts on a quick disconnect mounting system that swivels and tilts
providing flexibility for viewing from almost anywhere on the boat.
The transducer converts electrical energy from the transmitter into
mechanical pulses or sound waves. The transducer also receives the
reflected sound waves and converts them back into electrical signals for
530977-1r11015E 11/6/01 12:09 PM Page 2