Filter
Top Products
Self-Cleaning
• Setting Flex Clean
Setting Delay Flex Clean
INSTRUCTIONS
When the Self=Clean cycle is done:
1. The time of day,"DOOR LOCKED" and "CLEAN" icon will
remain in the display.
2. Once the oven has cooled down for approximately 1 HOUR, and
the "DOOR LOCKED" icon is no longer displayed, the oven
door can then be opened.
PRESS DISPLAY
Stopping or Interrupting a Self-Cleaning cycle:
If itbecomes necessary to stop or interrupt a Self-Cleaning cycle
duel.Press@.t°excessive smoke or fire in the oven: @
2. Once the oven has cooled down for approximately 1 HOUR and
the "DOOR LOCKED" iconis no longer displayed,the oven door Fig.7
can then be opened (See Fig. 7).
IMPORTANT NOTES when using the Self-Clean feature:
1. The Self-Clean feature will not operate whenever a radiant surface remains ON.
2. A Self-Clean cycle may be started if the appliance has the Cooktop Lockout active. A Self-Clean cycle cannot be
started if Oven Lockout feature is active.
3. If a Self-Cleaning-Cycle has started but not finished and a power failure occurs, the appliance may be thoroughly
cleaned. After the door unlocks and power has been restored, set for another Self-Clean cycle.
4. If your clock is set for normal 12 hour display mode the Delay Self-Clean cycle can never be set to start more than 12
hours in advance. To set for Delay Flex-Clean 12-24 hours in advance see page 18 for instructionsto set the control for
the 24 hour time of day display mode.
34