Filter
Top Products
14
BASIC OPERATIONS
6:,7&+,1*7+(32:(5212))
Press the [ ] (1s) to switch the transceiver ON.
• The power on message momentarily appears on the display.
• If the transceiver power on password has been activated {Menu No.100}, you must first
enter your password before you can operate the transceiver.
Press the [ ] (1s) again to switch the transceiver OFF.
Note: While using APRS, in order to prevent Packet miss-decoding, access Menu No. 110 and set
the Battery Saver to “Off” or “0.03”.
$'-867,1*7+(92/80(
Rotate the VOL control to increase the volume and counterclockwise to decrease
the volume.
Note:
X Some functions of this transceiver, such as the beep, have their own volume settings. Adjust
those settings to your desired values.
X Access Menu No. 121 to set the volume balance between Band A and B.