Kenwood TK-2180 Marine Radio User Manual


 
20
SCAN REVERT
You can select Revert zones and channels using the selector
and the Zone or CH/GID keys.
Eight types of Scan Reverts which can be programmed by
your dealer are available.
Last Called Revert: The last zone/ channel received is assigned
as the new revert zone and channel.
Last Used Revert: The last zone/ channel responded to is
assigned as the new revert zone and channel.
Selected: The last zone/ channel selected is assigned as the
new revert zone and channel.
Selected + Talkback: If the zone/ channel has been changed
during Scan, the newly selected zone/ channel is assigned as the
new revert zone and channel. The transceiver talks back on the
current receive channel.
Priority 1/ Priority 2: If your dealer has programmed a Priority
channel (either Priority 1 or Priority 2), this channel is the revert
zone and channel.
Priority 1 + Talkback/ Priority2 + Talkback: If your dealer has
programmed a Priority channel (either Priority 1 or Priority 2), this
channel is the revert zone and channel. The transceiver talks
back on the current receive channel.
PRIORITY SCAN
A Priority channel must be programmed in order for Priority
Scan to function.
The transceiver will automatically change to the Priority
channel when a signal is received on it, even if a signal is
being received on a normal channel.
The indicator represents the Priority 1 channel.
The indicator represents the Priority 2 channel.
The indicator represents both the Priority 1 and Priority 2
channel.