Filter
Top Products
13
CLEARING STORED DTMF NUMBERS
1 Press and hold the microphone # key for 1 second.
• “D” appears on the display.
2 Press the # key again.
• “D–CLEAR” appears on the display.
•To cancel the process, press any key other than 0 ~ 9.
3 Enter the desired memory location number (01 ~ 32).
REDIALLING
1 Press and hold the microphone key for 1 second.
• “A” appears on the display.
2 Press the 0 key two times.
3 Press the PTT switch to make the call.
Note: Switching the transceiver power OFF clears the redial memory.