Filter
Top Products
51
10
DTMF TX HOLD
This function causes the transceiver to remain in
transmission mode for 2 seconds after you release each
key. So, you can release Mic
[PTT]
while sending DTMF
tones.
1
Press
[F]
,
[MENU]
and turn the
Tuning
control to
select Menu No. 30 (DT.H).
2
Press
[MENU]
and turn the
Tuning
control to select
“ON” or “OFF” (default).
3
Press
[MENU]
to store the setting or any other key to
cancel.
4
Press any key other than
[MENU]
to exit Menu Mode.
AUTOMATIC DIALER
If you use the 10 dedicated DTMF Memory Channels to
store DTMF numbers, you do not need to remember a
long string of digits.
STORING A DTMF NUMBER IN MEMORY
1
Press
[F]
,
[MENU]
and turn the
Tuning
control to
select Menu No. 28 (DTMF.MR).
2
Press
[MENU]
and turn the
Tuning
control to select
your desired DTMF Memory Channel number from 0
to 9.
• You can also select a DTMF Memory Channel by using
Mic
[UP]
/
[DWN]
.
3
Press
[MENU]
.
• The DTMF code entry display appears and the first digit
blinks.
4
Turn the
Tuning
control to select a DTMF code.
• You can also enter a DTMF code using the Mic keypad.
Simply press your desired DTMF codes on the keypad.
• On the display,
is represented by “E” and is
represented by “F”.
5
Press
[MR]
to select the DTMF code and move the
cursor to the next digit.
• To move to the previous digit, press
[VFO]
. To delete the
character at the current cursor position, press
[F]
.