Filter
Top Products
The panel layout, familiar to Kenwood users, allows for intuitive operation.
It’s sure to win you over, increasing the accuracy of your operations
and allowing you to develop greater familiarity with the equipment.
Comfortable operational performance that
you can control at will.
MAIN BAND
RX / TX key
SUB BAND
RX / TX key
can easily call up the states of simultaneous dual
reception using the dual channel memory.
Number of
Memory Channels
Standard Memory:
100 Channels
Interval Specified Memory:
10 Channels
Extended Memory:
10 Channels
Control
You can use the frequency function that switches
legacy VFO A/VFO B by switching the main and
sub band. Turn the sub band reception on and off us-
ing the RX key on top of the main knob, and switch
between simplex and split using the TX key. A
single glance at the LED lighting lets you know the
current status.
Memory for a maximum of 120 channels is avail-
able. In addition to the repeater frequency, you can
also preset beacons and transmission stations. You
The new frequency function can be operated intuitively
You can also input split and sub band reception states into memory
The new split function allows you to use quick settings
1. Hold down the Sub Band TX key, and the split LED will flash.
2. When the transmission
frequency is set.
To set 2UP, simply press 2 on
the numeric keypad, and the
sub band VFO will change +2
kHz from the main reception
frequency; split set up is now
complete. To set 1DOWN,
press 0 and then 1 on the
numeric keypad, and you
can set increments of 1 kHz
from±1~9 kHz.
2 . Searching for a transmis
-sion frequency
Operate the sub band knob
to determine the transmission
frequency, press the TX key,
and setup is complete. Coarse
adjustment is also possible
by tapping a likely vacant
frequency on the main scope.
Similar to the legacy
series, you can add
functions via M S
and M/S giving a
dual-action quick-
split setup.
12
HF/50MHz TRANSCEIVER TS-990S
Operability