Filter
Top Products
M o d e l W S - 2 8 1 6 U - I T w w w . l a c r o s s e t e c h n o l o g y . c o m / s u p p o r t P a g e | 15
DEFAULT WEATHER ALARM VALUE
Pressure
Low
28.35 inHg
Wind Gust
High
62.0mph
High
30.71 inHg
Wind Direction
North
Temperature
(In or Out)
Low
32F
Rainfall in 24 hours
High
1.96 in
High
104F
Relative Humidity
(In or Out)
Low
High
45%
70%
PRESSURE ALARMS
1. In the normal display mode, press the ALARM button once. The high-
pressure alarm display will show.
2. Press and hold the SET button for about 2 seconds. The pressure digit will
flash.
3. Press the ▲/DATE button or ▼/RAIN button to set the high-pressure alarm
value. Hold the arrow button in to change the value faster.
4. Press the ALARM button to confirm the setting. The digit will stop flashing.
5. Press the SET button to switch the alarm on or off. The icon indicates the alarm is switched
on.
6. Press the ALARM button once. The Low Pressure alarm display will show.
7. Press and hold the SET button for about 2 seconds. The pressure digit will
flash.
8. Press the ▲/DATE button or ▼/RAIN button to set the low-pressure alarm
value. Hold the arrow button in to change the value faster.
9. Press the ALARM button to confirm the setting. The digit will stop flashing.
10. Press the SET button to switch the alarm on or off. The icon indicates
the alarm is switched on.
11. Press the ALARM button to move to the indoor temperature alarms.
INDOOR TEMPERATURE ALARMS:
1. The high indoor temperature alarm display will show.
2. Press and hold the SET button for about 2 seconds. The temperature digit
will flash.
3. Press the ▲/DATE button or ▼/RAIN button to set the high indoor
temperature alarm value. Hold the button in to change the value faster.
4. Press the ALARM button to confirm the setting. The digit will stop flashing.
5. Press the SET button to switch the alarm on or off. The icon indicates
that the alarm is switched on.
6. Press the ALARM button once. The low outdoor temperature alarm display
will show.
7. Press and hold the SET button for about 2 seconds. The temperature digit
will flash.
8. Press the ▲/DATE button or ▼/RAIN button to set the low indoor temp
alarm value. Hold the arrow button in to change the value faster.
9. Press the ALARM button to confirm the setting.
10. Press the SET button to switch the alarm on or off. The icon indicates
the alarm is on.
11. Press the ALARM button to move to the indoor humidity alarms.
INDOOR HUMIDITY ALARMS:
1. The high indoor humidity alarm display will show.
2. Press and hold the SET button for about 2 seconds. The humidity digit will
flash.
3. Press the ▲/DATE button or ▼/RAIN button to set the high indoor
humidity alarm value.
4. Press the ALARM button to confirm the setting. The digit will stop flashing.