LG Electronics 42PM3mv Marine Instruments User Manual


 
22 Plasma Monitor
Time Setting
- Timer function operates only if current time has been set.
- Off-Timer function overrides On-Timer function if they are set both set to the same time.
- The Monitor must be in standby mode for the On-Timer to work.
1. Press the MENU button and then use
DD / EE
button to select the TIMER menu.
2. Press the GG button and then use
DD / EE
button to select Off timer or On timer.
3. Press the GG button and then use
DD / EE
button to select On.
To cancel
On/Off timer function, select Off.
4. Press the GG button and then use
DD / EE
button to set the hour.
5. Press the GG button and then use
DD / EE
button to set the minutes.
6. For only
On timer function
Press the
GG button and then use
DD / EE
button to set sound level.
7. Press the ENTER button to save.
- If current time setting is wrong, reset the clock manually.
1. Press the MENU button and then use
DD / EE
button to select the TIMER menu.
2. Press the
GG button and then use
DD / EE
button to select Clock.
3. Press the GG button and then use
DD / EE
button to set the hour.
4. Press the GG button and then use
DD / EE
button to set the minutes.
5. Press the ENTER button to save.
TIMER
Prev.
Clock GG
Off timer
On timer
Auto off
TIMER
MENU
- - : - -
AM
TIMER
Prev.
Clock
Off timer
On timer GG
Auto off
TIMER
MENU
10 : 30
Volume 30
AM
On
Off
Time Setting
Clock Setup
Clock Setup
On/Off T
On/Off T
imer Setup
imer Setup
U514Aen 98/1/20 1:25 AM Page 22