LG Electronics 42PM3MV-UC Marine Instruments User Manual


 
34 Plasma Monitor
External Control Device Setup
Set ID
Set ID
- Use this function to specify a Monitor ID number.
- Refer to Real Data Mapping 1. See page 35.
1. Press the MENU button and then use
DD / EE
button to select the SPECIAL menu.
2. Press the GG button and then use
DD / EE
button to select Set ID.
3. Press the GG button and then use F / G button to adjust Set ID to choose the
desired Monitor ID number. The adjustment range of Set ID is 1 ~ 99.
4. Press the ENTER button to save.
T
ransmission
*
[Command 1] : First command to control PDP set.
(j, k or m )
*
[Command 2] : Second command to control PDP set.
*
[Set ID] : You can adjust the set ID to choose
desired monitor ID number in special
menu.
Adjustment range is 1 ~ 99.
When selecting Set ID 0, every
connected PDP set is controlled.
Set ID is indicated as decimal (1~99) on
menu and as Hexa decimal (0x0~0x63)
on transmission/receiving protocol.
*
[DATA] : To transmit command data.
Transmit FFdata to read status of
command.
*
[Cr] : Carriage Return
ASCII code 0x0D
*
[ ] : ASCII code space (0x20)
[Command1][Command2][ ][Set ID][ ][Data][Cr]
OK Acknowledgement
* The Monitor transmits ACK (acknowledgement) based on
this format when receiving normal data. At this time, if the
data is data read mode, it indicates present status data. If
the data is data write mode, it returns the data of the PC
computer.
[Command2][ ][Set ID][ ][OK][Data][x]
Error Acknowledgement
* The Monitor transmits ACK (acknowledgement) based on
this format when receiving abnormal data from
non-viable functions or communication errors.
[Command2][ ][Set ID][ ][NG][Data][x]
Transmission / Receiving Protocol
Command Reference List
*
When setting the 22 ~ 27, a menu doesnt display on screen.
Data 1: Illegal Code
2: not support function
3: Wait more time
01. Power k a 0 ~ 1
02. Input Select k b 0 ~ 5
03. Aspect Ratio k c 1 ~ 4
04. Screen Mute k d 0 ~ 1
05. Volume Mute k e 0 ~ 1
06. Volume Control k f 0 ~ 64
07. Contrast k g 0 ~ 64
08. Brightness k h 0 ~ 64
09. Color k i 0 ~ 64
10. Tint (option) k j 0 ~ 64
11. Sharpness k k 0 ~ 64
12. OSD Select k l 0 ~ 1
13.
Remote control lock mode
k m 0 ~ 1
14. Split Zoom k p 0 ~ 99
15. Treble k r 0 ~ 64
16. Bass k s 0 ~ 64
17. Balance k t 0 ~ 64
18.
Color Temperature (ACC)
k u 0 ~ 3
19. Red Adjustment k v 0 ~ 50
20. Green Adjustment k w 0 ~ 50
21. Blue Adjustment k $ 0 ~ 50
22. Abnormal Status k z 0 ~ a
23. ISM Method j p 0 ~ 3
24. Low Power j q 0 ~ 1
25. Orbiter Time Setting j r 1 ~ FE
26. Orbiter Pixel Setting j s 1 ~ 3
27. Auto Configure j u 1
28. Key m c Key Code
COMMAND 1 COMMAND 2 DATA
(Hexadecimal)
Baud rate : 9600 bps (UART)
Data length : 8 bits
Parity : None
* Use a crossed (reverse) cable.
Stop bit : 1 bit
Communication code : ASCII code
Communication Parameters
SPECIAL
Prev.
Input
Language
Key lock
ISM Method GG
Low power
Set ID
Caption / Text
Demo
OSD Rotate
SPECIAL
MENU
1
U514Aen 98/1/20 1:25 AM Page 34