Filter
Top Products
9
3.4.2 Battery level indication
The approximate power levels of your battery are indicated as follows:
3.4.3 Connect to PC
Use the supplied USB cable to connect the player to the PC.
1 Pull off the USB cap.
2 Connect the supplied USB cable to the USB port at the bottom of the player, the other
end to your PC.
3.4 Connect
3.4.1 Insert the battery
Note When the batteries are almost empty, the low battery screen blinks. The
player saves all settings and unfinished recordings and switches off in less than 60 seconds.
Full Two-thirds full Half full Low Empty
1 Remove the USB cap. 2 Remove the battery door
by sliding it in the
direction of the arrow.
3 Insert the supplied AAA
battery into the battery
compartment.