Filter
Top Products
MAINTENANCE
30
3. Push in the valve stem and deflate the floor. Push in the valve
stem and turn the stem a quarter turn clockwise to lock the
valve in the open position.
4. Push in the valve stems on the side air chambers to release
the air pressure evenly on all chambers. Push in the valve
stem and turn the stem a quarter turn clockwise to lock the
valve in the open position.
Folding Instructions
1. Deflate the boat and floor following the deflating instructions.
Keep the air valves open and the floor in‑place.
2. Remove the seat, oars, and any equipment.
3. Fold the deflated sides inward until the lifting handles or oar
locks meet in the middle.
4. Fold the boat transom inward and then fold in the two rear
cones inward over the transom.
18181
5. Starting at the transom end, roll up the boat from the transom
towards the bow.
18168