Filter
Top Products
Model NT3 Series
Page 11 midlandusa.com
ROGER BEEP (end of transmission) TONE
When the PTT button is released, the radio will beep to confirm to
other users that your transmission has finished. To turn the ROGER
BEEP tone on, press the MENU button until the display shows
an “rb” icon while on the right of the “rb” display, an “oF” icon
appears. Select “on” by pressing the ▼/▲ buttons and push the
PTT key, or press MENU to move to the next feature setting.
To turn the ROGER BEEP tone off, press the MENU button until the
display shows an “rb” icon while on the right of the “rb” display, an
“on” icon appears. Select “oF” by pressing the ▼/▲ buttons and
push the PTT key, or press MENU to move to the next feature setting.
USA/CAN/INT CHANNEL SELECTION
The NAUTICO3 channel selection can be changed to follow rules of
USA, Canada, or international rules. Press the MENU button until
the current channel icon (USA, CAN, INT) flashes. Select a different
channel list by pressing the ▼/▲ buttons until the desired icon
appears. Press the PTT key or press MENU to confirm
CALL ALERT SELECTION
Your NAUTICO3 has 3 user-selectable CALL ALERTS. To select,
press the MENU button six times, so a “CA” icon appears and to the
right of the “CA” icon the current CALL ALERT setting is displayed.
Then press the ▼/▲ buttons to make the CALL ALERT selections,
the radio will emit a corresponding tone for each selection. To
confirm, press the PTT button or press MENU to move to the next
feature setting.
WEATHER (WX) BAND RECEIVER
Your NAUTICO3 has a WEATHER (WX) BAND RECEIVER
function, to enable user to receive weather alert/reports from
designated NOAA stations. To turn the WEATHER (WX) RECEIVER
on, press and hold the MENU button for 3 seconds. The current WX
CHANNEL and WX BAND icon will appear on the display. Press
the MENU button and the ▼/▲ buttons to select one of the 10 WX
BAND channels. To confirm, press the PTT button or press MENU
to move to the next feature setting.
To turn the WEATHER (WX) RECEIVER off, press and hold the
MENU button for 3 seconds. The current radio setting will be displayed
and the WX BAND icon will go off.