Filter
Top Products
4
Wire and ferrule specification
Table.4 wire and ferrule specification
Wire size (mm
2
) Ferrule with insulation collar * Crimping tool *
0.3 / 0.5 AI 0,5-10WH
0.75 AI 0,75-10GY
1 AI 1-10RD
1.25 / 1.5 AI1,5-10BK
0.75 (combined 2 wire) AI TWIN 2 X 0,75-10GY
CRIMPFOX ZA3
*Ferrules and tools are distributed by Phoenix Contact.
Jumper cable
The jumper cable between S1,S2 and SC terminal has been installed in the factory as shown in Fig.2.
Fig.2. Short wire
Before connecting safety input wire to S1,S2 and SC terminal, remove this jumper cable.
AMAM