Moxa Technologies 5200 Life Jacket User Manual


  Open as PDF
of 2
 
— 4 — — 5 — — 6 —
5. Software Installation Information
To install NPort Administration Suite, insert the NPort Document &
Software CD into your computer’s CD-ROM drive. Once the NPort
Installation CD window opens, click on the Installation button, and then
follow the instructions on the screen. To view detailed information about
NPort 5200 Administration Suite, click on the Documents button, and
then select “NPort 5200 Series User’s Guide” to open the pdf version of
this user’s guide. The PComm Lite program is also included in the
Documentation & Software CD free of charge. Install PComm Lite to
use the Serial Console for configuring the IP address for the first time.
6. Pin Assignments and Cable Wiring—NPort 5230/
5230-T
Terminal Block Wiring
Rx+
CTS
RTS
GND
GND
Rx
-
RxD
Serial Device
Signals
NPort 5230/5230-T Signals
Tx+ / Data+
TxD
Tx
-
/ Data
-
P1 RS-232
Tx
Rx
RTS
CTS
GND
T+
T-
R+/D+
R-/D-
GND
P2 RS-485/422
Note:
NPort 5232/5232I/5232-T/5232I-T have 2 RS-422/485 ports. The pin
assignments are the same as NPort 5230/5230-T’s port 2. Refer to the
“NPort 5200 Series User’s Manual” for more details.
7. Pin Assignments and Cable Wiring—NPort 5210/
5210-T
RJ45 (8-pin) Connector Pinouts
1
8
8-Pin
1
2
3
4
5
6
7
8
Signal
DSR
RTS
GND
TxD
RxD
DCD
CTS
DTR
Cable Wiring (RS-232)
Four cables are available as optional accessories that can be used to
connect NPort 5210/5210-T to RS-232 serial devices. For your
convenience, we show precise cable wiring diagrams for each of the four
cables.
RJ45 (8-pin) to DB25 Female (Cable Name: CBL-RJ45F25-150)
NPort 5210/5210-T
8 pins 25 pins
DSR
RTS
GND
TxD
RxD
DCD
CTS
DTR
RS-232
Device
DTR
CTS
GND
RxD
TxD
DCD
RTS
DSR
Cable Wiring
1
2
3
4
5
6
7
8
20
5
7
3
2
8
4
6
RJ45 Connector DB25 Female
RJ45 Port DB25
Male
RJ45 (8-pin) to DB25 Male (Cable Name: CBL-RJ45M25-150)
NPort 5210/5210-T
8 pins 25 pins
DSR
RTS
GND
TxD
RxD
DCD
CTS
DTR
RS-232
Device
DTR
CTS
GND
RxD
TxD
DCD
RTS
DSR
Cable Wiring
1
2
3
4
5
6
7
8
6
4
7
2
3
8
5
20
RJ45 Connector DB25 Male
RJ45 Port DB25
Female
RJ45 (8-pin) to DB9 Female (Cable Name: CBL-RJ45F9-150)
NPort 5210/5210-T
8 pins 9 pins
DSR
RTS
GND
TxD
RxD
DCD
CTS
DTR
RS-232
Device
DTR
CTS
GND
RxD
TxD
DCD
RTS
DSR
Cable Wiring
1
2
3
4
5
6
7
8
4
8
5
2
3
1
7
6
RJ45 Connector DB9 FemaleRJ45 Port DB9 Male
RJ45 (8-pin) to DB9 Male (Cable Name: CBL-RJ45M9-150)
NPort 5210/5210-T
8 pins 9 pins
DSR
RTS
GND
TxD
RxD
DCD
CTS
DTR
RS-232
Device
DTR
CTS
GND
RxD
TxD
DCD
RTS
DSR
Cable Wiring
1
2
3
4
5
6
7
8
6
7
5
3
2
1
8
4
RJ45 Connector DB9 MaleRJ45 Port DB9 Female
8. Specifications
Power requirements
NPort 5210/5210-T: 12 to 48 VDC, 305 mA at 12V (max.)
NPort 5230/5230-T: 12 to 48 VDC, 305 mA at 12V (max.)
NPort 5232/5232-T: 12 to 48 VDC, 359.6 mA at 12V (max.)
NPort 5232I/5232I-T: 12 to 48 VDC, 509.4 mA at 12 V (max.)
Operating temp.
0 to 55
◦
C (32 to 131
◦
F)
-40 to 75
◦
C (-40 to 167
◦
F)
for standard models
for -T models
Operating humidity
5 to 95% RH
Dimensions (W×D×H)
NPort 5210/5230/5232/
5210-T/5230-T/5232-T(including ears)
90 × 100.4 × 22 mm
3.54 × 3.95 × 0.87 in
NPort 5210/5230/5232/
5210-T/5230-T/5232-T(without ears)
67 × 100.4 × 22 mm
2.64 × 3.95 × 0.87 in
NPort 5232I/5232I-T
(including ears)
90 × 100.4 × 35 mm
3.54 × 3.95 ×1.37 in
NPort 5232I/5232I-T
(without ears)
67 × 100.4 × 35 mm
2.64 × 3.95 × 1.37 in
Surge protection
15 KV ESD for serial port
Magnetic isolation
1.5 KV for Ethernet
Power line protection
4 KV Burst (EFT), EN61000-4-4
2 KV Surge, EN61000-4-5
Regulatory approvals
FCC Class A, CE Class A, UL, CUL, TÜV
Copyright © 2005
Moxa Technologies Co., Ltd.
All rights reserved.
Reproduction without permission is prohibited.
Tel: +886-2-8919-1230
www.moxa.com
Fax: +886-2-8919-1231
support@moxa.com.tw
 previous