Filter
Top Products
4) Without twisting, fold the bladder over once and place into the center
of the pouch between the two wings (Fig.6d). Ensure the yellow
inflator pulltab is positioned so it hangs out from the upper left hand
corner (above left side wing).
5) Fold both side wings on top of the bladder and secure wingtips
together with Velcro
™
at ends. (Fig.6d)
6) Fold the lower flap up and secure both side edges to wings with
Velcro
™
. (Fig.6d)
7) Fold the upper flap down onto the lower flap and secure with the
Velcro
™
running across the width of the pouch (Fig.6d). Ensure the
yellow inflator pulltab is still hanging out of the upper left corner
(lower right corner when donned as in Fig.6e).
p8
Fig. 6a Fig. 6b Fig. 6c
Fig. 6d Fig. 6e