Filter
Top Products
2) Unscrew and remove the CO
2
gas cylinder from the inflator and
inspect its small end. If it is pierced, replace it (Fig. 4)!
FIGURE 4
3) Make sure the manual lever is in the up-and-ready position and
insert the green indicator pin if not already in place. Ensure the CO
2
cylinder is screwed hand tight into the inflator.
4) Undo the Velcro™ tabs on the wearer’s left-hand side of the collar
to expose the oral inflator. Check that the oral-inflation dust cap is
properly in the stowed position (Fig. 5).
Dust cap
in deflation
position
Dust cap
in stowed
position
FIGURE 5
5) Reposition the inflator’s protective cover and repack (P. 7). If
everything checks out according to the preceding instructions, your
LP is ready for use.
Sizing and Fit
The LP provides 33.7 lbs of buoyancy and is designed for wearers with a
chest range of 30-52 inches weighing over 80 pounds.
Compact Tactical Life Preserver Owner’s Manual 2 3 Compact Tactical Life Preserver Owner’s Manual