Nexus 21 1510 Marine Instruments User Manual


  Open as PDF
of 3
 
Autopilot Servo:
The PCB, circuit board shall have an extra grounding acc. to Service
Bulletin 00-23. Can be seen as two extra wires on the PCB.
Software and settings:
Check that AP Servo S/W is of latest version 3.6 Marked with a sticker
on the EPROM.
Check dip switches:
Note! With all Silva Pumpsets both dip-switch shall be in down
position.
Rudder angle Transmitter RAT/RFU:
The Rudder angle Transmitter must be proper installed so that the
turn of the RAT is given the same angle as the turn of the
Quadrant/rudder shaft.
24 V
12 V
Keep in Down
position
Up= Solenoid
Down= Pumpset
 previous